Metalworking tools

Circular tube thread dies Thread type: tubular inch thread Pitch: in numbers of strokes per inch Top angle: 55 ° Tolerance: class A Material: CS - Carbon tool Steel Dimensions - see attached catalog sheet Standard: ČSN EN 24231, DIN ISO 228, ČSN 223212 Nicht verwendet aus Überbestand

Parting insert for hardened steel, replaceable insert, insert MGGN200 CM HRC55 Suitable for up to 2mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders Width: 2mm Material: CBN(1x) CBN coating: without coating - Second side universal(steel stainless steel) - suitable for starting the groove HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) - the other side without CBN is suitable for steel and stainless steel Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Parting insert for hardened steel, replaceable insert, insert MGGN300 CM HRC55 Suitable for up to 3mm holders for Korloy MGMN300 inserts - ie for MGEHR / MGEHL, MGIVR / MGIVL holders Width: 3mm Material: CBN(1x) CBN coating: without coating - Second side universal(steel stainless steel) - suitable for starting the groove HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) - the other side without CBN is suitable for steel and stainless steel Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Milling insert for hardened steel, replaceable insert, insert APGW 160408 HRC55 Suitable for holders for APKT 1604 or APMT 1604 inserts Radius: 0.8mm Material: CBN(1x) CBN coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and impact resistance. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions(CBN): Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Face and corner milling head AKKO MAKINA for replaceable inserts Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: BDMT 11T3 Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Face and corner milling head for interchangeable inserts - VBD SANDVIK R390 Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: according to the selected variant - R390 Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Front and corner milling head for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: according to the selected variant - SEET 09T3 Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Face and corner milling head for interchangeable inserts - VBD SECO XOMX Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: according to the selected variant - XOMX Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Angle milling head for chamfering edges AKKO MAKINA for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: according to the selected variant - type SEMT 12T3 / SEET 12T3 / SEKT 12T3 / R245-12T3 Angle: 45° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Forming attachment - square punch Attachment size / for shaping heads: according to the chosen variant Hexagon size: depending on the selected option Dimensional tolerances and embossing depth - see attached PDF data sheet. Material: HSS or HSSE-PM - according to the selected variant Coating: uncoated * we are able to offer TiN / TiAlN / INOX PLUS, ZIRINOS coatings, or other coatings, we can also supply these extensions with internal cooling Usage - see attached video Uncoated attachment design: steel, aluminum, copper, brass, cast iron - with max. strength up to 900MPa Coated attachment design: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa We recommend punches made of sintered steel HSSE-PM for serial production and for stamping steels with higher strength + stainless steel. Head attachments work on the principle of embossing / extrusion - see the attached video. Remember that the hole must always be properly pre-drilled and chamfered before punching - run-in for the punch! If you need a different size or tolerance of the punch, or if you did not find the required punch in the offer, send us an inquiry. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Shaping slotting holder / holder for CNC For groove with width / insert size: according to the selected variant Max. depth of cut: according to the selected variant Clamping diameter: according to the selected variant Other dimensions - see enclosed catalog sheet. The holder is made of hardened hardened steel. It is possible to buy an eccentric sleeve for the holder, with which it is very easy to fine-tune the offset (in the Y axis) of the knife edge, which is ideal if the machine does not have a Y axis for precise adjustment. You can easily eliminate any inaccuracy / error thanks to the possibility of rotating the case (on the scale) by 0.5 mm on both sides. These holders can also be supplied in a version for embossing square, hexagonal and spline (multi-groove) profiles - see the enclosed catalog sheet. The holder is supplied without a plate, these are purchased separately - you can find them in related products or in the enclosed catalog sheet. We can offer plates made of sintered steel HSSE-PM or carbide.

Turning knife straight smoothing with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223720 / CSN 22 3720, DIN4975, DIN 4975R, ISO10 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.