Metalworking tools

Multi-purpose right-hand ground spiral drill / "tooth drill" with cylindrical shank - with graduated tip Diameter: 5.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Multipurpose right-hand ground spiral drill / "toothed drill" with cylindrical shank - with graduated tip Diameter: 11.0mm Drill length: Short series - see attached photo for lengths From a diameter of 4.0 mm, there are 3 ground surfaces on the cylindrical shank in the clamping part against rotation in the chuck. Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Use: - universal Steel, cast iron , hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping

Self-locking chuck - precise quick-release head 1-13mm, type SOLID Clamping cone: R8 Outer diameter of chuck: 51mm Total length: 184mm / 195mm Throw:

Self-locking chuck - exact quick-release head 1-16mm, type SOLID Clamping cone: R8 Outer diameter of chuck: 57mm Total length: 195mm / 210mm Throw:

Clamping range: 0.8-10mm Clamping thread: 3/8 "x 24 UNF, 24 strokes per inch (equivalent to 9,525 mm) Body Diameter: 41mm Total Height: 50 / 61mm Usage: Handheld Classic and Battery Drills Black

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (equivalent to 12.7mm ) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Narex Classical and Battery Drills, etc. If you change the chuck look at the body of the existing chuck, where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 3/8 "x 24 UNF, 24 strokes per inch (equivalent to 9,525mm) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Handheld Classic and Battery Drills Black

Set of brushes with hexagon shank Set contains brushes in materials: nylon, steel, brass All brushes are included in the set in diameters 8-9-10-11-12-13-14-15- 16-17-18-19mm Brushes with 6mm hexagonal shank -

Hand Loader for Thread Repair Inserts For Inserts: M10 The stop for various lengths of inserts can be adjusted - it is secured by an Allen screw.

Thread Repair Kit M10 (M10x1,25) mm / Thread Repair Gradient: 1,25 - Fine Gradient 1pcs - HSS Grinded Drill & Special Tapper 1pcs Inserts Lengths are always a multiple of the diameter of the thread to be repaired, ie if you are repairing the M6 ??thread and the set is 1.5D, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Boring the damaged thread with the drill bit (if fitted) 2. Cut out the thread with a special tap (use of other - notch or machine taps does not work) 3. Using the supplied boot loader, insert the insert into the required depth (be careful, the inserts can not be retightened!) 4. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert

Manual Thin-walled Brass Copper Tube Bender - Tube Bender Tube Diameter: 10 mm Radius: 23mm Shoulder Length: 270mm & 290mm Bending Machine tubes in the angular range 0 to 180 degrees. This is a pipe bender, not a round blade!