Metalworking tools

Home Turning parting cutting insert, exchangeable slice, VBD - 1.25 mm Home Recess width: 1.25 mm Coating: TiCN (Titanium Carbon Nitride) Use Steel Home: P15-P30 Home stainless steel: M15-M30 Home Superalloys: S05-S10 Suitable for both internal and external undercuts

Grinding / polishing disc Carborundum C 150 - BE15, replacement for rubber polishing discs Tyrolit 43373-1540 - 150x20x20 96A 80 E 1R Diameter: 150mm Disc strength: 20mm Hole: 20mm Grain 150 artificial corundum green, rubber binder Speed: 2540 rpm. ; 20m/s Recommended use: steel class 11, steel up to 55HRC Possible use: steel up to 67HRC, stainless steel, cast iron, bar metals

Professional metal cutting disc Tyrolit - steel, stainless steel, 41 97PA 46 Q 3 BF C80 / 442798 / 89599-1216 Diameter of the disc: 125mm Strength of the disc: 1.0mm Diameter for fixing: 22.2mm (classic) Max. speed: 12250 rpm Made in accordance with ANSI B7.1 / EN 12413 Made in the Czech Republic

MN80 Lathe Milling Machine Lathe Chinese Clamping surface 70x150mm Axial displacement approx. 80mm 1 piece nonius 0,02mm, 1x turning = 1mm Slot: 3xT10 Distance from the rear edge to the hole axis: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking system Adjustable axial clearance of the bolt bearing The surfaces of the product are carefully angled and ground, all sliding function surfaces are scraped Material: Angle holder and T-shaped table with C-25 gray cast iron Nonius, handle and fastener is made of steel Screw feed is of strength steel Usage: MN80 lathe, or even for other lathes. If you want to use support on another lathe (Rotwerk, Asist, Proma, Quantum, Bernardo and others), please send us a dimensioned drawing of your lathe's knife holder. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 0,5 liter Pack quantity (in kg): 0,445kg (main unit of measurement) - plastic container with cap It is formulated with Castrol technology, which gives the oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 1 liter Packaging quantity (in kg): 0,89 kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 5 liters Packaging quantity (in kg): 4,45 kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 10 liters Packaging quantity (in kg): 8,9kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C

Liquid high-performance stretching cutting oil, Castrol Variocut B 30 is a mineral chlorine-free cutting oil. Quantity in the package (in liters): 208 liters / original barrel It is formulated from Castrol technology additives, which give the oil exceptional lubricating properties even under extreme working pressures. Usage : Highly alloyed steel materials Assembled for machining under very difficult conditions, for broaching, hobbing gears, turning gears, threading, etc. Helps to create an excellent quality of the final surface even under high pressure conditions. extreme machining conditions and will also contribute to extending tool life. Characteristics : - Does not contain chlorine - reduced oil disposal costs - Castrol additive technology - tool life extension, machining speed increase, top final surface, minimal tool wear - Good wetting characteristics - low oil yield, lower costs - Excellent air separation - Reduction of foaming and aeration of the oil - Mild odor - Contributes to improving the working environment Technical parameters: Appearance at 25°C : Yellow-brown, clear Relative density at 20°C: 0.882 Kinematic viscosity at 40°C: 22mm2/s Flash point according to Pensky-Martens: 169°C

Countersinks for wood, plastic, acrylic, etc. For drills with diameter: 3,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 4,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws

Countersink for wood, plastic, acrylic, etc. For drills with diameter: 5,0mm Max. Recess Diameter: 16mm Suitable for countersinking, for recessed head screws - screws