Metalworking tools

Home nut Taps on English thread cyclo Home Size: BSCY 1/4 "x 26 Home Point angle: 60 ° Home Gradient: 26 EAST inch Dimension: l1 - 120mm l2 - 20mm d2 - 4,5mm a - 3,5mm Material: HSS Thread BSCY used in motorcycles made during the war, is still used today.

BSCY 3/8 "x 26 Peak angle: 60 ° Climbing: 26 strokes per inch Dimensions: l1 - 120mm l2 - 20mm d2 - 7mm a - 5.5mm Material: HSS Thread BSCY was used Pre-war or manufactured motorcycles during the war are still used today.

Size: BSCY 5/16 "x 26 Peak angle: 60 ° Climbing: 26 strokes per inch Dimensions: l1 - 120mm l2 - 20mm d2 - 6.3mm a - 4.9mm Material: HSS Thread BSCY used in motorcycles made during the war, is still used today.

Nut tap, for English bicycle thread Dimensions: BSCY 5/16 "x 26 Peak angle: 60° Pitch: 26 feet per inch Dimensions: l1 - 78mm l2 - 36mm d2 - 6,3mm a - without square Material: HSS BSCY thread used for motorcycles made during the war, it is still used today.

Left nut tap, for English bicycle plug Size: BSCY 9/16 "x 20 Top angle: 60 Â ° Â ° Pitch: 20 feet per inch Material: HSS < br> The BSCY thread was used in war-made motorcycles, it is still used today.

Matrix screwdriver, for English bicycle thread Size: BSCY 9/16 "x 20 Peak angle: 60A‚ Â ° Pitch: 20 feet per inch Material: HSS Thread BSCY was used in motorcycles made during the war, it is still used today.

Neck tap on American Unified Whitworth Thread Size: UN 3/8 "x 20 Peak Angle: 60 ° Gradient: 20 Beams per inch Dimensions : l1 - 152mm l2 - 38mm d2 - 7,3mm a - 5,5mm Material: HSS

Matte tap on American unified whitworth thread Size: UN 5/8 "x 20 Peak angle: 60 ° Climbing: 20 strokes per inch Dimensions : l1 - 200mm l2 - 58mm d2 - 12,7mm a - 9,5mm Material: HSS

Dimensions: UN 9/16 "x 20 Peak angle: 60 ° Climbing: 20 strokes per inch Dimensions : l1 - 190mm l2 - 50mm d2 - 11,4mm a - 8,5mm Material: HSS

Matte Tap, US Unified Whitworth Thread Size: UN 9/16 "x 26 Peak Angle: 60 ° Gradient: 26 Strokes per inch Dimensions : l1 - 190mm l2 - 50mm d2 - 11,4mm a - 8,5mm Material: HSS

Quick-change round knife holder for multi-fix - size C3 Holder 40x160 for four square knives(type B), for knives with max. diameter â € o40mm Holder length: 160mm

Quick-change holder for clamping morse sleeves for multi-fix - size C3 Holder 50x150 for clamping / reducing sleeve(type S) Clamping sleeves diameter(hole): 50mm Holder length: 150mm After buying the cases - see related products - it is possible to clamp MK4 drills