Metalworking tools

Spannspitze fest abgeflacht mit 60° Spitzenwinkel und gesinterter Hartmetalleinlage Morsekegelgröße: je nach gewählter Variante Andere Abmessungen - siehe Etiketten für einzelne Varianten Die gesamte Spitze ist auf eine Härte von HRC 58 bis 62 gehärtet. Norm: ČSN 243317 / ČSN 24 3317 / DIN807 / DIN 807 Feste Spitzen sind tschechische Produktion, unbenutzt, stammen aus Überbeständen. Nur eine begrenzte Auswahl.

Face and corner milling head AKKO MAKINA for replaceable inserts Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: APKT 1003 Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Face and corner milling head AKKO MAKINA for replaceable inserts Diameter: according to the selected variant Number of blades: according to the selected variant Type of inserts: depending on the selected variant - type SDXT or SDET Angle: 90° Other dimensions - see the attached catalog sheet The packaging is without VBD AKKO MAKINA socket cutters are an economical and at the same time very high-quality solution for your production. Refined material of the cutter body, special coating resistant to high temperatures and aggressive substances, precise machining of the body and insert bed, internal cooling of the tool and connecting material of the Swiss manufacturer SFS are a guarantee of the quality and long life of AKKO tools.

Turning insert for hardened steel, replaceable insert, insert CNGA 120408 HRC55 Suitable for holders for CNMG / CNMM inserts. Radius: 0.8mm Material: CBN(2x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Turning insert for hardened steel, replaceable insert, insert WNGA 080408 HRC55 Suitable for holders for WNMG / WNMM inserts. Radius: 0,8mm Material: CBN(3x) Coating: uncoated HRC55 Series: Fine-grained 70% CBN granulate with ceramic binder, high rigidity and resistance to shocks. Suitable for roughing hardened steels 45-65 HRC, cast iron and very hard alloys such as Inconel, surface hardened steels, etc. Suitable for intermittent cutting. Application: Cast iron: K05-K15 Carbide and hardened steels: H10-H25(45-65 HRC) Cutting conditions: Hardened steel: Vc = 80-240m / min; fn = 0.12-0.25mm / rev. ; Ap = 0,5-2,5mm Ductile iron: Vc = 60-150m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.6-2.5mm Gray cast iron: Vc = 500-1500m / min; fn = 0.50-0.80mm / rev. ; Ap = 0.25-1.0mm Hard alloys with Co> 17%: Vc = 20-40m / min; fn = 0.20-0.30mm / rev. ; Ap = 0.1-0.5mm Manganese steels: Vc = 140-200m / min; fn = 0.3-0.7mm / rev. ; Ap = 0,2-2,9mm The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 5 pcs in the basket.

Jigsaw - core drill for core drill Crown diameter: according to the selected variant Recommended drilling depth: max 110 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 18-50mm: 20.1399 Material - HSS-XE - special high-alloy steel + DURABLUE surface treatment for longer drill life Tooth hardness: 68HRC Catalog number: 20.1280 These core drills are made of special high-alloy steel HSS-XE, which ensures extreme hardness at the tips of the teeth (up to 68 HRC), high wear resistance and long service life. Thanks to the surface treatment, it lasts longer. Few manufacturers are able to produce HSS core drills hardened in several stages. This is standard for Karnasch®. This is the only way to obtain extremely hard tooth tips (68 HRC) and a flexible and durable drill body. For HSS-XE / ASP core drills, five different drill geometries are applied for different drilling diameters and depths, so that the result is always perfect.

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 40 mm Clamping shank: * Up to 60mm: weldon - 19 mm (3/4 ") * Over 60mm: weldon - 32mm (1-1 / 4 ") Centering pins (see related products): For diameters 12-17mm: 20.1149 For diameters 18-65mm: 20.1151 For diameters 66-120mm: 20.1273 Blade material: carbide Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1315 Usage: Drilling in steels with hardness

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 55 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 12-17.5mm: 20.1271 For diameters 18-60mm: 20.1273 For diameters 61-200mm: 20.1272 Blade material: carbide Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1316 Usage: Drilling in steels with hardness

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 80 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 14-17mm: 20.1302 For diameters 18-60mm: 20.1427 For diameters 61-200mm: 20.1428 Blade material: carbide Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1650 Usage: Drilling in steels with hardness

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 110 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 14-17mm: 20.1304 For diameters 18-55mm: 20.1428 For diameters 56-200mm: 20.1486 Blade material: carbide Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1660 Usage: Drilling in steels with hardness

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 150 mm Welding shank - 19 mm (3/4 ") Blade material: carbide Centering pins (see related products): For diameters 18-19mm: 20.1429 + 20.1399 For diameters 20-54mm: 20.1152 For diameters 55-60mm: 20.1124 Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1665 Usage: Drilling in steels with hardness

Clamping tip fixed flattened with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243317 / ČSN 24 3317 / DIN807 / DIN 807