Metalworking tools

Threaded replaceable cutting insert for turning knives in wooden jersey size 8x8, 10x10 and 12x12 mm A AA ™ plate length: 3.00 mm Plate length: 15.00 mm Max. cutting depth: 3 mm Coating: TiN Application: Steel: P20-P35 Stainless steel 28: abrasion resistant 29: M10-M20 The plate has a undercut on the front of the board for better chip removal compared to the original type Suitable for knives marked LW1010R-04(for sizes 10x10) Also suitable for older sets of turning knives, where the inserts were uncoated - gray The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pcs in the basket.

Turning insert VBD WCMT 050304 TiN Radius: 0,4mm Up. hole: 3,2mm Coating: TiN Application: Steel: P20-P35 Stainless steel 28: abrasion resistant 29: M10-M20 > Suitable for turning knife sets(SWGCR 1010 and SWGCR 1212) in wooden case and emergency for SWACR 1010 / SWACR 1212 knives The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Set of 12x12 mm turning lathes with soldered slices / with brazed plate Cat. No. 3441208 Clamping height: 12mm Slices: P30 Set contains 8 pcs of turning knives of these types: DIN4971 DIN4972 DIN4978 DIN4981 DIN282 DIN4974 DIN283 DIN263

Set of lathe 16x16 mm with solder blades / with brazed plate Cat. 3441508 Clamping height: 16mm Slices: P30 Set includes 8 pcs of turning knives of the following types: DIN4971 DIN4972 DIN4978 DIN4981 DIN282 DIN4974 DIN283 DIN263

DIN4971 DIN4972 DIN4978 DIN4981 DIN282 DIN4974 DIN283 DIN263

Precision cast iron stand for hand-held electric drill, precise, rigid and stable guide, with swivel head for drilling at an angle of 0-90 ° For drills with diameter: 43mm / 39mm / 25mm The drill is mounted over the enclosed plastic inserts Lever travel length: 60mm Distance between base and clamping hole: 295mm Distance between drilling axis and column: 124mm Total stand height: 400mm Diameter column: 25mm Clamping holes of the stand: 8mm Distance of clamping holes: 140mm Dimensions of the base: 156x156mm T-slot in the base: 3 / 8 "(9,5mm), we are able to make clamping stones to order. Hex wrenches are included. Vise we recommend size max. 80mm - see related products section Ideal for precision drilling of wood, metal and other materials The drilling depth scale has an adjustable insole.

Cutter Master Grinder - Cutters, Drills, Countersinks, Drills, Reamers, Taps, Drills ... with Pneumatic Spindle Mounting - To Enhance High Tool Sharpness, Type ON-220 Maximum Cut Tool Diameter: 50 mm Cutter Length: 245 mm 5C: 3 - 25 mm Transverse Shift - Y-Axis: 75 mm Longitudinal Shift - X-Axis: 150 mm Tilt Range Holder: 360 ° Angle adjustment angle: -5 ° to 30 ° Wheel travel: 250 mm Nonius cutting: 0,02 mm / divide, total 100 pieces Spindle has a flange - suitable for 2pcs. 3br. 4br. 6 and 12 tools. The grinder has both right and left rotation. Speed: 2800 rpm. Disc: 125x50x31,75mm Dimensions: 700x700x600mm Power supply: 230V / 50Hz Required pressure: 0,63 MPa Motor protection: IP54 Bulb: 50W / 24V / GY 6,35 OSRAM Scope of delivery: Supplied without collet , 5C collet can be purchased with us. Application: Suitable for sharpening blades / grinding cylindrical parts of tools. Also suitable for forehead grinding. Also suitable for grinding spiral drill bit drill bit drill (without cutter).

5C (vis related products) Suitable for grinding multi-blade tools, internal and external radii (convex and concave radii). For diameters: 3-25mm (via 5C collet)

Quick-release knife head / knife holder for quick tool change - multi-fix style - size T2(S2) type Dixon For knives with max. four edges: 20x20mm When replacing the holder holders in the head, the repeatable accuracy is 0.01mm. Set contains: 1x clamping head 100x100x70mm 3x holder 98x40x51mm for four square knives(type D), for knives of max. size 20mm 3pcs spare screws with four square heads 1x handle for locking the holder in the knife head 1x handle for tightening the four square heads Screw in knife holders Attention - the screw for attaching the knife head to the lathe support needs to be modified or a new one is needed - it is not part of the package. Center hole 25mm, washer diameter 44.5mm, upper hole diameter for 16mm screw.

Quick-release knife holder for quick tool change - multi-fix style - size M type Dixon For knives with max. four edges: 16x16mm When the knife holders in the head are replaced, the repeatable clamping accuracy is 0.01 mm. 1x holder 73x32x34mm for four edge knives, for knives with max. size 16mm 1pc spare screw with hex head

Quick-release knife head / knife holder for quick tool change - multi-fix style - size M(S0) type Dixon For knives with max. four edge: 16x16mm When replacing the knife holders in the head, the repeatable clamping accuracy is 0.01 mm. Set contains: 1x clamping head 73x73x51mm 2x holder 73x32x34mm for four square knives, for knives with max. size 16mm 1x holder 73x32x34mm for round knives, for knives with a maximum diameter of 16mm 1x holder for a cutting blade height 19mm(3/4 ") with a width of 3,175mm 1x parting blade blade 4 pcs of spare screws with four square heads 1x handle for tightening four four square screws in knife holders Attention - the screw for attaching the knife head to the lathe support needs to be modified or a new one is made - it is not part of the package.

Quick-release knife head / knife holder for quick tool change - multi-fix style - size Mini type Dixon For knives with max. four edges: 12x12mm < br> When replacing the knife holders in the head, the repeatable clamping accuracy is 0.01 mm. Set contains: 1x clamping head 40x40x38mm 2x holder 50x20x25mm for four square knives, for knives with max. size 16mm 1x holder 50x20x25mm for round knives, for knives with max. Diameter 3/8 "(9,525mm) 1x holder for parting blade height 12.5mm(1/2" ) by width 2,235mm(3/32 ") * holders and clamping head are made of aluminum 4 pcs of spare screws 2 pcs of middle sleeves Screw M8 and M10