Metalworking tools

Set of black 1-10mm drills in a black binder

Pliers holder type 5C for spindle of lathe SV-18 with taper metr.50 Outer taper: metr.50 Inner taper: 10Â ° Rear cylinder bore diameter 38.0mm Overall housing length: 85mm Material: tool steel Collets 5C can be purchased from us separately in pieces in the design: * Round * Four edges * Hexagon - see related products

Pliers holder E21SN 242145 size 25 for spindle lathe SV-18 with taper metr.50 Outer taper: metr.50 Inside Cone: 15 ° 15 ° Rear cylinder bore diameter 38.2mm Total case length: 85mm Material: tool Steel

Socket Chassis Chuck for SV18 and TOS S-28 Chucks Chucks: IUS 160mm Flange Diameter: 160mm Material: Gray Cast Iron Clamping Thread: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Chainsaws: IUS 200mm Flange Diameter: 200mm Material: Gray Cast Iron Clamping Thread: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Socket Chuck for SV18 and TOS S-28 Chucks Chucks: IUS 250mm Diameter flange: 250mm Material: Gray cast iron Clamping threads: M68x6 To fasten the universal chuck, drill chucking holes for the chuck need to be drilled and then twisted from the rear so that the indentation matches the universal.

Support flange for SV-18 and TOS S-28 lathe Flange diameter: 200mm Material: gray cast iron Â!Vit: M68x6 The flange has a groove for securing with a pin when turning between the points.

Set of 19 left-hand ground spiral drill bits for metal with reinforced core 1.0-10.0 mm Set includes left-hand drill bits 0.5 mm each Helix angle: 36° Material: HSS Order no. : SV338LNHSS-19K

Set of 25 pcs of left ground spiral drills for metal with reinforced core 1.0-13.0 mm Set contains left drills for 0.5 mm Helix angle: 36 Â ° Material : HSS Order no. : SV338LNHSS-25K

Set of 19 left-hand ground cobalt spiral drill bits for metal with a reinforced core 1.0-10.0 mm The set includes left-hand drill bits 0.5 mm each Helix angle: 36° Material: HSSCo5 Order no. : SV338LNHSSCo5-19K

Set of 25 left-hand ground cobalt spiral drill bits for metal with a reinforced core 1.0-13.0 mm The set contains left-hand drill bits of 0.5 mm each Helix angle: 36° Material: HSSCo5 Order no. : SV338LNHSSCo5-25K

Set of spiral cobalt grinders with cylindrical shank, type CZ004 Angle of blade: 118 ° (-2 °) Helix angle: 25-30 ° Angle of drill bit width: 25 ° (-2 °) Material: HSSE - Co5 Rapid Steel Standard: Business Standard, Drilling Length Corresponds to DIN338 Cobalt Tungsten-Molybdenum Steel with Very Good Cutting Properties, Hardness at Higher Temperatures and Brightness, Suitable for heavily machinable materials with a tensile strength of up to about 1000 PMa. CZ004 CZ004 Special cutting edge cutting edge significantly reduces the friction of the ridge of the drilling material while at the same time creating optimal conditions for the coolant supply directly to the cutting point . Thanks to its optimally chosen geometry, the drill tip significantly contributes to the high drill bit stability even at high cutting speeds while ensuring high dimensional and geometrical accuracy of the bore holes. Angle of pitch and geometry of the CZ004 drill spiral creates optimum conditions for chip formation and removal including coolant inlets Reduces the roughness of the cut surfaces of the CZ004 drill bit reduces the size of the ultimate forces during drilling and chip removal. Very thin core at the front of the drill significantly reduces the necessary axial forces for drilling and subsequent heat generation while maintaining the stiffness of the drill due to multiple increases in core thickness continuously towards the drill bit Extremely powerful drill bit with high the heat sinking, whose dimensions correspond to DIN 338, but its revolutionary geometry developed on the basis of years of experience, classifies this drill as a cutting tool for high-speed steel in the field of drilling, in particular for: tensile strength of 900 N / nm2 - high-alloy steels resistant to corrosion, acids and