Metalworking tools

Set AKKO 10 pcs WALTER ADMT 160612R-F56 ??WSP45S WALTER * Length 150mm without internal cooling! Diameter: 25mm Angle: 90 ° Number of Cuts: 2 Clamping Diameter: 25 mm Overall Length: 150 mm Working Length: 50 mm VBD Cutting Edge: 15mm Bolts: 1515-M4x9 / T15 Type VBD: 1) ADMT 1606 Packaging incl. 10pcs VBD ADMT 160612R-F56 ??WST45S Steel: P30-P50 Stainless Steel: M30-M50 Superslitin (Ni, Co, Fe, Ti): S30-S50 AKKO MAKINA drilling mowers are an economical and at the same time very high quality solution for your production. Heat-treated milling body material, special heat-resistant coating and aggressive materials, precision machining of the body and insert bush, and the Swiss SFS joint material guarantee the quality and long life of AKKO tools.

Set AKKO 10 pcs WALTER ADMT 160612R-F56 ??WSP45S WALTER * Length 150mm without internal cooling! Diameter: 32mm Angle: 90 ° Number of Cuts: 3 Clamping Diameter: 32 mm Overall Length: 150 mm Working Length: 50 mm VBD Cutting Edge: 15mm Bolts: 1515-M4x9 / T15 Type VBD: 1) ADMT 1606 Packaging incl. 10pcs VBD ADMT 160612R-F56 ??WST45S Steel: P30-P50 Stainless Steel: M30-M50 Superslitin (Ni, Co, Fe, Ti): S30-S50 AKKO MAKINA drilling mowers are an economical and at the same time very high quality solution for your production. Heat-treated milling body material, special heat-resistant coating and aggressive materials, precision machining of the body and insert bush, and the Swiss SFS joint material guarantee the quality and long life of AKKO tools.

Volume: 1 liter Packaging: In a plastic container with a lid High quality refined hydraulic oil with a high viscosity index Contains a DMSO additive according to IP346. Specifications and Approvals: Denison HF-1 Denison HF-1 Denison HF-2 Denison HF-2 Eaton (Vickers) M -2950 S Eaton (Vickers) I-286 S Denison T6H Denison T6C Vickers 35VQ25 Description: Made of high-viscosity petroleum based base oils and refined additives. An important part of their formulation are specially developed polymeric substances which further increase the viscosity index of the oil and thus contribute to very small changes in temperature viscosity. Shell Tellus S2 V oils are especially designed for use in hydraulically operated and control systems exposed to extreme year-round ambient temperature changes. They also guarantee excellent performance in friction surfaces with steel / steel / steel / bronze material pairs. They are classified in the HVLP class of hydraulic oils according to DIN 51 524 part 3 and ISO-L-HV according to ISO 6743-4. Properties: * Very low temperature dependence Extremely high shear stability Excellent anti-wear properties High oxidation and thermal stability Good corrosion protection > Application: * For all applications requiring high viscosity hydraulic oil - fork-lift trucks entering frozen boxes or brick kilns, construction and forestry machines operating all year round in unprotected environments, etc., rolling bearings

Volume: 5 liters Packaging: In plastic container with lid High quality refined hydraulic mineral oil with high viscosity index Contains DMSO additive according to IP346. Specifications and Approvals: Denison HF-1 Denison HF-1 Denison HF-2 Denison HF-2 Eaton (Vickers) M -2950 S Eaton (Vickers) I-286 S Denison T6H Denison T6C Vickers 35VQ25 Description: Made of high-viscosity petroleum based base oils and refined additives. An important part of their formulation are specially developed polymeric substances which further increase the viscosity index of the oil and thus contribute to very small changes in temperature viscosity. Shell Tellus S2 V oils are especially designed for use in hydraulically operated and control systems exposed to extreme year-round ambient temperature changes. They also guarantee excellent performance in friction surfaces with steel / steel / steel / bronze material pairs. They are classified in the HVLP class of hydraulic oils according to DIN 51 524 part 3 and ISO-L-HV according to ISO 6743-4. Properties: * Very low temperature dependence Extremely high shear stability Excellent anti-wear properties High oxidation and thermal stability Good corrosion protection > Application: * For all applications requiring high viscosity hydraulic oil - fork-lift trucks entering frozen boxes or brick kilns, construction and forestry machines operating all year round in unprotected environments, etc., rolling bearings

Volume: 10 liters Packaging: In a plastic container with a lid High quality refined hydraulic oil with a high viscosity index Contains a DMSO additive according to IP346. Specifications and Approvals: Denison HF-1 Denison HF-1 Denison HF-2 Denison HF-2 Eaton (Vickers) M -2950 S Eaton (Vickers) I-286 S Denison T6H Denison T6C Vickers 35VQ25 Description: Made of high-viscosity petroleum based base oils and refined additives. An important part of their formulation are specially developed polymeric substances which further increase the viscosity index of the oil and thus contribute to very small changes in temperature viscosity. Shell Tellus S2 V oils are especially designed for use in hydraulically operated and control systems exposed to extreme year-round ambient temperature changes. They also guarantee excellent performance in friction surfaces with steel / steel / steel / bronze material pairs. They are classified in the HVLP class of hydraulic oils according to DIN 51 524 part 3 and ISO-L-HV according to ISO 6743-4. Properties: * Very low temperature dependence Extremely high shear stability Excellent anti-wear properties High oxidation and thermal stability Good corrosion protection > Application: * For all applications requiring high viscosity hydraulic oil - fork-lift trucks entering frozen boxes or brick kilns, construction and forestry machines operating all year round in unprotected environments, etc., rolling bearings

Volume: 50ml Packaging: High quality refined hydraulic mineral oil with high viscosity index Contains DMSO additive according to IP346. Specifications and Approvals: Cincinnati P-70(ISO 46) Denison HF-0 Denison HF-1 Denison HF-2 Eaton(Vickers) M-2950 S Eaton(Vickers) I-286 S - Denison T6H - Denison T6C - Vickers 35VQ25 Description: Production of petroleum base oils with high viscosity index and refining ingredients. An important part of their formulation are specially developed polymeric substances, which further increase the viscosity index of the oil and thus contribute to very small changes in viscosity with temperature. Shell Tellus S2 V oils are primarily intended for use in hydraulically operated and control systems exposed to extreme changes in ambient temperature throughout the year. They also guarantee excellent performance in three-surface pumps made of steel / steel and steel / bronze material pairs. They are classified in the group of hydraulic oils of the HVLP class according to DIN 51 524 part 3 and ISO-L-HV according to ISO 6743-4. Properties: * Very low temperature dependence * Extremely high shear stability * Excellent abrasion resistance * High oxidation and thermal stability * Good corrosion protection Applications: * For all applications requiring hydraulic oil with a high viscosity index * For Control exposed to a wide temperature range * Ex. forklifts used in freezers or brick kilns, construction and forestry machines working all year round in unprotected environments, etc., further rolling mills

Extra short reduction insert with morse cavity, ISO40 / MK4, 40/4, 40x4 - . Internal cone: Morse, MK 4 Length: 60 mm (specifies the length of the case that will protrude out of the machine) Standard: replacement for DIN 2080, ČSN 247213, 220432 Strength: Case quenched, then ground (like all others). This type of case was manufactured in the 1960s as an accessory for TOS milling machines Usage: Clamp / mandrel for milling cutters < / b> with Taper Shank MK4 For Clamping with ISO40 Conical Milling Machine Clamping Procedure: After inserting the sleeve into the spindle, the sleeve is fixed over two screws firmly to the spindle machinery. The tool is inserted directly into the sleeve, the sleeve is through, so the tool is tightened directly, in the case of the MK4 cone with the M16 screw.

Set of turning knives 6mm with replaceable blade(height 6mm, width 8mm or 10mm) Set contains 7 pcs of knives of these types: - SCLCL 0608 E06 (for inserts CCMT 060204, CCMT 060202, CCMT 060208 , possibly CCGT ( for aluminum and non-ferrous metals) - SCLCR 0608 E06 (for plates CCMT 060204 , CCMT 060202 , CCMT 060208 , possibly CCGT (for aluminum and non-ferrous metals) - SDJCR 0608 E07 (for inserts DCMT 070204 , DCMT 070202 , DCMT 070208 , possibly DCGT (for aluminum and non-ferrous metals)) - SDNCN 0608 E07 (for inserts DCMT 070204 , DCMT 070202 , DCMT 070208 , possibly DCGT (for aluminum and non-ferrous metals)) - SWGCR 0610 E05 ( for inserts WCMX 050308 , WCMX 050304 , WCMX 050302) - SER 0608 E08 ( threaded for inserts 08 ER) - MGEHR 0610 E02 ( grooving for inserts MGMN200 ) Furthermore, the set includes a T6, T8 key and a bent 3mm Allen key You can purchase additional inserts from us separately - see related products.

Set of turning knife 8mm with replaceable blade(height 8mm, width 8mm or 10mm) Set contains 7 pcs of knives of these types: - SCLCL 0808 E06 (for inserts CCMT 060204, CCMT 060202, CCMT 060208 , possibly CCGT ( for aluminum and non-ferrous metals) - SCLCR 0808 E06 (for plates CCMT 060204 , CCMT 060202 , CCMT 060208 , possibly CCGT (for aluminum and non-ferrous metals) - SDJCR 0808 E07 (for inserts DCMT 070204 , DCMT 070202 , DCMT 070208 , possibly DCGT (for aluminum and non-ferrous metals)) - SDNCN 0808 E07 (for inserts DCMT 070204 , DCMT 070202 , DCMT 070208 , possibly DCGT (for aluminum and non-ferrous metals)) - SWGCR 0810 E05 ( for inserts WCMX 050308 , WCMX 050304 , WCMX 050302) - SER 0808 E08 ( threaded for inserts 08 ER) - MGEHR 0810 E02 ( grooving for inserts MGMN200 ) Furthermore, the set includes a T6, T8 key and a bent 3mm Allen key You can purchase additional inserts from us separately - see related products.

Set of turning knives 10mm with replaceable blade ( height 10mm, width 10mm) The set contains 7 pcs of knives of these types: - SCLCL 1010 F06 (for CCMT 060204 , CCMT 060202 , CCMT 060208 , possibly CCGT ( for aluminum and non-ferrous metals) - SCLCR 1010 F06 ( for plates CCMT 060204 , CCMT 060202 , CCMT 060208 , possibly CCGT ( for aluminum and non-ferrous metals) - SDJCR 1010 F07 ( for plates DCMT 070204 , DCMT 070202 , DCMT 070208 , possibly DCGT (for aluminum and non-ferrous metals)) - SDNCN 1010 F07 (for inserts DCMT 070204 , DCMT 070202 , DCMT 070208 , possibly DCGT (for aluminum and non-ferrous metals)) - SWGCR 1010 F05 ( for inserts WCMX 050308 , WCMX 050304 , WCMX 050302) - SER 1010 F11 ( threaded for inserts 11 ER) - MGEHR 1010 F02 ( grooving for inserts MGMN200) Furthermore, the set includes a T8 key and a bent 3mm Allen key You can purchase additional inserts from us separately - see related products.

Set of turning knife 12mm with replaceable insert (height 12mm, width 12mm) The set contains 7 pcs of knives of these types: - SCLCL 1212 F06 (for inserts CCMT 060204, CCMT 060202, CCMT 060208, or CCGT (for aluminum and non-ferrous metals) - SCLCR 1212 F06 (for inserts CCMT 060204, CCMT 060202, CCMT 060208, or CCGT (for aluminum and non-ferrous metals) - SDJCR 1212 F07 (for inserts DCMT 070204, DCMT 070202, DCMT 070208, or DCGT (for aluminum and non-ferrous metals)) - SDNCN 1212 F07 (for inserts DCMT 070204, DCMT 070202, DCMT 070208, or DCGT (for aluminum and non-ferrous metals)) - SWGCR 1212 F05 (for plates WCMX 050308, WCMX 050304, WCMX 050302) - SER 1212 F11 (threaded for inserts 11 ER) - MGEHR 1212 F02 (grooving for MGMN200 inserts) Furthermore, the set includes a T8 key and a bent 3mm Allen key You can purchase additional inserts from us separately - see related products.

Set of lathe knives 16mm with replaceable blade ( height 16mm, width 16mm) The set contains 7 pcs of knives of these types: - SCLCL 1616 H09 (for inserts CCMT 09T304, CCMT 09T302, CCMT 09T308, or CCGT ( for aluminum and non-ferrous metals) - SCLCR 1616 H09 ( for CCMT 09T304, CCMT 09T302, CCMT 09T308 inserts, or CCGT ( for aluminum and non-ferrous metals) - SDJCR 1616 H11 ( for DCMT inserts 11T304 , DCMT 11T302 , DCMT 11T308 , possibly DCGT (for aluminum and non-ferrous metals)) - SDNCN 1616 H11 (for inserts DCMT 11T304 , DCMT 11T302 , DCMT 11T308 , possibly DCGT (for aluminum and non-ferrous metals)) - SWGCR 1616 F06 ( for inserts WCMT 06T308 , WCMT 06T304 , WCMT 06T302) - SER 1616 F16 ( threaded for inserts 16 ER) - MGEHR 1616 H03 ( grooving for inserts MGMN300) Furthermore, the set includes a T15 key and a bent 5mm Allen key You can purchase additional inserts from us separately - see related products.