Metalworking tools

Heavy duty carbide drill bits SK / TK / HA / PVD Diameter: 17,0mm Clamping diameter (h6): 18,0mm Length: 3D Hex lenght: 73mm Overall length: 123mm Helix angle: 30 - 35 ° Angle of the tip: 140 ° Four-piece cutter Coating: AlTiN (Aluminum Titan Nitrid) Carbide: Fine K20 / K30 DIN6539 Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels to 65 HRC Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steel up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cat. No. S30112.170

Carbide Edge Cutter / Sintered Carbide Cutter Number of Cuts: 4pcs. Diameter of the working part: 12mm, tolerance h6 Peak angle: 90 ° Minimum precipitation diameter: Dc: 2,4mm Overall length: 83mm Helix angle: 0 ° < Front clamping angle: 0 ° Clamping shank: 10mm, tolerance h6 Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine grain carbide, high hardness and abrasion resistance, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD (AlTiN) Application: Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Fine cast iron Refractory steels alloyed Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see enclosed photo Ref. S350002.090024

Carbide Cutter (TK) Quarter Round - Convex - Sintered Carbide Number of Cuts: 4pcs. diameter: 6mm, tolerance h6 Diameter Dc: 5mm Radius: R0,5 Overall length: 57mm Helix angle: 0 ° Angle of the head: 0 ° Clamping shank: 6mm, tolerance h6 Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine grain carbide, high hardness and abrasion resistance, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD (AlTiN) Application: Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Fine cast iron Refractory steels alloyed Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see enclosed photo Ref. No. S360002.005

Carbide Cutter (TK) Quarter Round - Convex - Sintered Carbide Number of Cuts: 4pcs. Diameter: 8mm, Tolerance h6 Dc Diameter: 4mm Radius: R2 Overall Length: 63mm Helix Angle: 0 ° Front Angle: 0 ° Clamping shank: 8mm, tolerance h6 Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra fine grain carbide, high hardness and abrasion resistance, tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD (AlTiN) Application: Low alloy steel up to 600 MPa Alloyed steel up to 1200 MPa High alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steel up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Fine cast iron Refractory steels alloyed Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see enclosed photo Ref. No. S360002.020

Carbide ( TK ) multifunctional / universal milling cutter made of cemented carbide Number of blades: 2 pcs. Diameter of the working part: 3mm, tolerance h6 Blade length: 6mm Apical angle: 60° Total length: 50mm Clamp shank: 4mm, tolerance h6 Standard: PN-ZPS, DIN 6535 HA Coating: without coating Use: Low alloy steels up to 600 MPa Alloy steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Nosile cast iron Refractory alloyed steels Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order. No. : S390002.060030

Abrasive fleece - abrasive fleece - scotch-brite (3M) with Velcro fastening 150mm diameter Schotch Brite SC-DH 1064296

Replacement insert VBD SCMT 09T304 - HMP NC3120 Radius: 0,4mm Blade material: NC3120 - suitable for normal machining to roughing steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 City type: Medium until the finishing geometry of the breaker for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert VBD SCMT 120404 - HMP NC3120 Radius: 0.4mm Insert material: NC3120 - suitable for general machining up to roughing of steel. High chipping resistance, high temperature stability thanks to Al2O3 coating. Coating : MT-CVD : TiCN Al2O3 TiCN Use : Steel : P20-P25 HMP Type : Medium to finishing breaker geometry for small chips. The wider wall of the breaker extends the service life of the insert - even with a sudden change in the depth of cut. The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert VBD SCMT 120404 - C25 PC9030 Radius: 0.4mm Insert material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steels. High chipping resistance under constant machining conditions. Coating: PVD, TiAlN(Titanium Aluminum Nitride) Usage: Stainless steel: M25-M35 C25 breaker: Suitable for intermittent cutting, for general machining of cast iron, stainless steel and heat-resistant alloys. Low cutting forces, very good resulting surface. The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

RDMT 10T3 insert clamping screw For RM-5R50 and RM-5R63 milling cutters

Screw for clamping / holding insert plate For milling cutters RM-5R50 and RM-5R63

Insert screw for TPUN 16 / TPKN 16 / TPMN 16 / TPKR 16 inserts in milling head For milling heads: TPS-50, TPS-63, SAE-30 , SAE-35, SAE-40, SAE-45, SAE-50, SAE-63 - For countersinks: VCE-4521, VCE-4531