Metalworking tools

Short machine tap for conical tubular spiral thread Thread type: NPTF - American conical pipe thread (National Pipe Taper Fuel), mechanically-sealing pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Helix: 35 ° Material: HSSE - High speed steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

External replaceable blade thread insert 16 EL M ISO BMA Size: 16 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Height (to edge) : 3.47mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Clamping collet series: ER 16 with higher clamping accuracy Size: according to the selected variant Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 426EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Internal replaceable blade thread insert 16 IR M ISO BMA Size : Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Apex angle: 60° Design of the plate: right Height (to edge) : 3.47mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Precision clamping sealed collet ER 16 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 426EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 16mm Length: 28mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Internal replaceable cutting edge threaded insert 16 IL M ISO BMA Size: 16 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: left Height (to edge) : 3.47mm Suitable for cutting internal metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Clamping reduction sleeve for multi-fix For clamping tools with a Morse taper: according to the selected variant Outer diameter: according to the selected variant Suitable for head / multifix: according to the selected variant It is necessary to buy a holder type S for the case - see related products

Jigsaw - core drill for magnetic drill Crown diameter: according to the selected variant Recommended drilling depth: max 30 mm Clamping shank: * Up to 60mm: weldon - 19 mm (3/4 ") * over 60mm: weldon - 32mm (1-1 / 4 ") Centering pins (see related products): For diameters 12-60mm: 20.1261 Material - HSS-XE - special high-alloy steel + DURABLUE surface treatment for longer drill life Tooth hardness: 68HRC Catalog number: 20.1312 These core drills are made of special high-alloy steel HSS-XE, which ensures extreme hardness at the tips of the teeth (up to 68 HRC), high wear resistance and long service life. Thanks to the surface treatment, it lasts longer. Few manufacturers are able to produce HSS core drills hardened in several stages. This is standard for Karnasch®. This is the only way to obtain extremely hard tooth tips (68 HRC) and a flexible and durable drill body. For HSS-XE / ASP core drills, five different drill geometries are applied for different drilling diameters and depths, so that the result is always perfect.

Jigsaw - core drill for magnetic drill Crown diameter: according to the selected variant Recommended drilling depth: max 55 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 12-60mm: 20.1271 Material - HSS-XE - special high-alloy steel + DURABLUE surface treatment for longer drill life Tooth hardness: 68HRC Catalog number: 20.1313 These core drills are made of special high-alloy steel HSS-XE, which ensures extreme hardness at the tips of the teeth (up to 68 HRC), high wear resistance and long service life. Thanks to the surface treatment, it lasts longer. Few manufacturers are able to produce HSS core drills hardened in several stages. This is standard for Karnasch®. This is the only way to obtain extremely hard tooth tips (68 HRC) and a flexible and durable drill body. For HSS-XE / ASP core drills, five different drill geometries are applied for different drilling diameters and depths, so that the result is always perfect.

Clamping tip fixed flattened with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Material: Tool steel Standard: DIN807 -> replacement for ČSN 243317 - without sintered carbide insert!

Extended clamping tip fixed flattened MK 3 with apex angle 60 ° and sintered carbide insert - for grinders Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: DIN807 -> replacement for ČSN 243317

Left side turning knife with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223717 / CSN 22 3717, DIN4980, DIN4980L, ISO6 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.