Metalworking tools

Spare part - tip for swivel tip MK5 ÄOSN 243324 Tip diameter Dmax: 45mm Shaft diameter for needle bearing: 40mm Diameter for axial bearing: 30mm Diameter for rear bearing: 12mm Overall length: 225mm

Replacement tip for Škoda MK6 swivel tip ČSN 243324 Diameter of the tip Dmax: 60mm Diameter of the ground cylindrical part: 55mm Diameter for the thrust bearing: 40mm Diameter for the rear bearing: 20mm Total length: 305mm Suitable for older Škoda tips with a black case. Not suitable for the Silver-line ( series type ČSN 243324M).

Spare part - tip for swivel tip MK6 A „A’SN 243324 Tip diameter Dmax: 60mm Shaft diameter for needle bearing: Diameter for thrust bearing: Diameter for rear bearing: Overall length:

Bearing 51206 for swivel tip MK5 ÄOSN 243324

Replacement outer cover visor / mica for hood "fire" and "eagle" from our offer Width 111mm Height 90mm Strength 1mm

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 55mm d: 80mm e: 3x thread M6 (3x120 °) on axis o. 65mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handlery: up to 0.005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Passes directly on the lathe flange: - ASIST PLATINUM PRO AE4S50M MINI LATHE - Proma SM 300 E

Clamping sleeve for ER collet lathe a: 20mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 84mm < Collet clamping procedure: Click the clamping nut into the clamping nut - as shown in the picture. Suitable for lathes - instead of a universal chuck

Clamping sleeve for ER collet lathe a: 24mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 85mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0,005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0.005mm Other bracelets can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Machine reamer for holes ( holes ), cylindrical shank Dimension and tolerance: 5 F7 Standard: ČSN 221430 / CSN 22 1430 Cat. . No. : P300500V0F7S

P602 WP25 Replacement Angle of Adjustment: 90 ° Cutting edges: Round edges with bevel Feed direction: N - feed right and left Material of slicer: WP25 (uncoated) Application: Steel: P20 -P30

High-quality petroleum multifunctional oil. It is refined with a modern ashless complex additive that increases the bearing capacity of the lubricating film, improves resistance to wear, oxidation, corrosion, rusting and modifies frictional properties. Usage: gearboxes and other moving machine parts (high-pressure oil), hydraulic circuits, rolling bearings, guide surfaces of construction equipment, lubrication of modern machine tools working under demanding conditions, where both multifunctionality and high quality oil are used . Volume: 0.5 liter (pourable, plastic container) Classification and specifications: ISO 6743 - ISO-L-G , ISO-L-HM , ISO-L-CKC DIN 51502 , CGLP DIN 51524-2 : HLP DIN 51517-3 : CLP Properties : - Excellent high-pressure lubrication properties - Excellent anti-corrosion properties - Excellent resistance to oxidation is a guarantee of a very long service life - Effective prevention of the occurrence of jerky movements of loaded, slow-moving sliding guides (stick-slip) - Excellent adhesion of the oil limits its splashing and is a guarantee of its successful use even during lubrication of vertical guiding surfaces - Minimal tendency to foam formation