Metalworking tools

Left-sided circular dies with jaws / threaded jaws Left-sided metric thread Tolerance: 6g (normal tolerance) Material: HSSE - High speed steel + Co5 Dimensions - see attached catalog sheet Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210)

Zircon-ceramic combined lamellar grinding wheel for grinding stainless steel and ordinary steel Diameter: according to the selected variant Grain: according to the selected variant Clamping diameter: 22.2mm (classic) Max. revolutions: see product description for individual variants Usage: steel / stainless steel, possibly brass, copper, aluminum, zinc Abrasive type: zircon-corundum - red The slats are alternately interlaced (zirconium / ceramic) Large coverage, long service life, up to 50% faster than conventional lamellar discs. The disc is resistant to high temperatures. Suitable for surface preparation and finishing work, removing rust, sharp edges, cleaning weld seams and bevel grinding Suitable for various materials: stainless steel, steel, chrome, titanium and its alloys, non-ferrous metals

Left-sided machine circular dies Left-sided metric thread Tolerance: 6g (normal tolerance) Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ČSN 22 3216 / CSN 223216

Ceramic lamellar grinding wheel for grinding stainless steel, common steel and aluminum Diameter: according to the selected variant Grain: according to the selected variant Clamping diameter: 22.2mm (classic) Max. revolutions: see product description for individual variants Usage: steel / stainless steel / aluminium Abrasive type: zircon-corundum - red Large coverage, long service life, up to 50% faster than conventional lamellar discs. The disc is resistant to high temperatures. Suitable for surface preparation and finishing work, removing rust, sharp edges, cleaning weld seams and bevel grinding Suitable for various materials: stainless steel, steel and aluminum

Jigsaw - core drill for magnetic drill Crown diameter: according to the selected variant Recommended drilling depth: max 110 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 18-50mm: 20.1399 Material - HSS-XE - special high-alloy steel + GOLD-TECH surface treatment Tooth hardness: 68HRC Kat. No .: 20.1280U These core drills are made of special high-alloy steel HSS-XE, which ensures extreme hardness at the tips of the teeth (up to 68 HRC), high wear resistance and long service life. Thanks to the surface treatment, it lasts longer. Few manufacturers are able to produce HSS core drills hardened in several stages. This is standard for Karnasch®. This is the only way to obtain extremely hard tooth tips (68 HRC) and a flexible and durable drill body. For HSS-XE / ASP core drills, five different drill geometries are applied for different drilling diameters and depths, so that the result is always perfect.

Coarse-tooth circular circular saw Diameter: according to the selected variant Disc width: according to the selected variant Diameter of the clamping hole: according to the selected variant Material: HSS - unless otherwise stated Usage: steel, cast iron, non-ferrous metals, plastics Standards: CSN 222916.1 - disc with body grinding towards the center - does not grip the material CSN 222916 - disc with full body profile

Right side turning knife with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223716 / CSN 22 3716, DIN4980, DIN4980R, ISO6 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Right side turning knife with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223716 / CSN 22 3716, DIN4980, DIN4980R, ISO6 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Countersink with tapered Morse shank for interchangeable guide pins Diameter of the recess: according to the selected variant Guide pins are purchased separately - see related products Clamping shank: morse taper Other dimensions: see enclosed catalog sheet Material: HSS Standard: ČSN 22 1606 / CSN 22 1606 / DIN 375 Application: for countersinking holes for 90 ° Allen screws in common materials.

Hand tap BA Thread type: British Association - model thread Thread apex angle: 47.5 °, rounded top and bottom of the thread Fitting: medium Material: HSS - High speed steel Standard: BA93, ISO529 HSS taps are suitable for tapping common steels (up to 900MPa)

External replaceable blade thread insert 16 ER M ISO BMA Size: 16 Ascent: according to the chosen variant Full profile / partial profile: depending on the selected variant Peak angle: 60° Design of the plate: right Height (to edge) : 3.47mm Suitable for cutting external metric threads Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Clamping collet series: ER 16 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 426E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.