Metalworking tools

Metric hand tap M39 III Gradient: 4.0, basic, ie 39x4,0 (M39x4,0) Facing: ISO2 / 6H - Cut Thread Profile Material: HSS - Rapid Cut Steel Standard: DIN352 (corresponds to ČSN 22 3010 / CSN 223010)

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 19.75-22.00mm (25/32" - 27/32") Type designation: T11 Blade length: 71mm Total length: 200mm Square: 11.2mm Diameter of clamping shank: 14.0mm Standard: ČSN 221424 Code designation: 261.119 Hand adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 23.75-26.60mm (15/16" - 3/64") Type designation: T13 Blade length: 84mm Total length: 240mm Square: 12.5mm Diameter of clamping shank: 16.0mm Standard: ČSN 221424 Code designation: 261.133 Hand adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 26.50-29.75mm (1 3/64" - 1 11/64") Type designation: T14 Blade length: 93mm Total length: 265mm Square: 14.0mm Diameter of clamping shank: 18.0mm Standard: ČSN 221424 Code designation : 261.140 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 29.50-33.00mm (1 11/64" - 1 9/32") Type designation: T15 Length of blades: 105mm Total length: 295mm Square: 16.0mm Diameter of clamping shank: 20.0mm Standard: ČSN 221424 Code designation : 261.157 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 32.50-36.50mm (1 9/32" - 1 7/16") Type designation: T16 Blade length: 116mm Total length: 320mm Square: 18.0mm Diameter of clamping shank: 22.4mm Standard: ČSN 221424 Code designation : 261.164 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 36.00-40.40mm (1 9/32" - 1 7/16") Type designation: T17 Length of blades: 127mm Total length: 355mm Square: 20.0mm Diameter of clamping shank: 25.0mm Standard: ČSN 221424 Code designation : 261.171 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 40.00-45.00mm (1 19/32" - 1 3/4") Type designation: T18 Blade length: 143mm Total length: 390mm Square: 22.4mm Diameter of clamping shank: 28.0mm Standard: ČSN 221424 Code designation : 261.188 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 44.50-50.00mm (1 3/4" - 1 31/32") Type designation: T19 Blade length: 161mm Total length: 435mm Square: 25.0mm Diameter of clamping shank: 31.5mm Standard: ČSN 221424 Code designation : 261.195 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 49.50-55.00mm (1 31/32" - 2 5/32") Type designation: T20 Blade length: 161mm Total length: 435mm Square: 28.0mm Diameter of clamping shank: 33.5mm Standard: ČSN 221424 Code designation : 261.201 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Adjustable reamer without guide / bet guide sleeve, ČSN 221424 Range: 54.50-60.00mm (2 5/32" - 2 11/32") Type designation: T21 Blade length: 161mm Total length: 435mm Square: 31.5mm Diameter of clamping shank: 40.0mm Standard: ČSN 221424 Code designation : 261.218 Manual adjustable reamers are ONLY suitable for through holes. The blades gradually ream the (conical hole), i.e. the set diameter will be reamed only when the reamer passes through the blades. Adjustable reamers are used in finishing machining operations of cylindrical holes. Reamed holes have an exact size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set dimension is measured over a pair of opposing knives. The commonly supplied blade geometry is suitable for machining gray cast iron and bronze.

Cycle Thread Thread 34.7 x 1/24 ", Left Diameter: 34.7mm Gradient: 24 Strokes per inch Overall Length: 45mm Clamping Hole: 13mm Pencil