Metalworking tools

Machine reamer for Morse taper For reaming Morse taper: MK2 Total length: Standard: ČSN 221466.2 - i.e. the second of the set ( of the set of 3 pcs) Czech production, unused - excess stock

Machine reamer for Morse taper For reaming Morse taper: MK3 Total length: 147mm Standard: ČSN 221466.2 - i.e. the second of the set ( of the set of 3 pcs ) Czech production, unused - excess stock

Machine reamer for Morse taper For reaming Morse taper: MK4 Total length: Standard: ČSN 221466.2 - i.e. the second of the set ( of the set of 3 pcs) Czech production, unused - excess stock

Machine reamer for Morse taper For reaming Morse taper: MK5 Total length: Standard: ČSN 221466.2 - i.e. the second of the set ( of the set of 3 pcs) Czech production, unused - excess stock

Machine reamer for Morse taper For reaming Morse taper: MK5 Total length: Standard: ČSN 221466.2 - i.e. the second of the set ( of the set of 3 pcs) Czech production, unused - excess stock

Machine reamer for Morse taper For reaming a Morse taper: MK0 Total length: Standard: ČSN 221466.3 - i.e. the third of the set ( of the set of 3 pcs) Czech production, unused - excess stock

Drill is cut to two diameters: 5,0mm and 7,0mm Overall length: 105mm, length of helix: 65mm Shank diameter: 7,0mm Under drilling you need to choose lower cutting conditions than standard norms for classical drills.

Cutter for cutting pen grooves Blade width: 8.0mm Number of teeth: 10 Clamp shank: 10 mm Cutter length: 56mm Standard: company standard, replacement for ČSN 222185

Ring cutter - set of 3 cutters (1x roughing 1x semi-roughing 1x finishing) Module: M2.5 Angle: 20° x 10° x 10° Marking on cutters: h=5.625mm, h0 = 12.15, Lw=2381 Diameter: 140mm Clamping diameter: 40mm Material: HSS Standard : ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M4 Angle: 20° x 10° x 10° Marking on cutters: h =9.0mm, h0 = 13.89, Lw=2670 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M5 Angle: 20° x 10° x 10° Marking on the cutters: h =11.25mm, h0 = 13.89, Lw=2624 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512

Trapezoid hand set tap Tr10x3 - set Pitch: 3.0 Material: NO - Tool Steel Length of the tap: 90mm Stem diameter: Square: 6.1mm ČSN 22 3090N / 223090N