Metalworking tools

Lamella grinding wheel Diameter: according to the selected variant Grain: according to the selected variant Clamping diameter: see product description for individual variants (classic) Usage: metal, possibly universal - wood, etc. Abrasive type: corundum

Left threaded eyelet with jaws / threaded eyelet with jaws Dimension and pitch: according to the selected variant Other dimensions - see product description for individual variants Metric thread left Material: NO - Tool Steel Standard: ČSN EN 22 568 / CSN EN 22568 ( ĆSN 22 3210 / CSN 223210 )

Grinding stone, grinding body on shank, type 52A Diameter (max/min): according to the selected variant Clamping shank: according to the selected variant Clamp shank length: according to the selected variant Grain: according to the selected variant Abrasive type: artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, stainless steel, cast iron

Short machine tap, straight slot, for conical tubular thread with chip breaker Thread type: NPTF - American conical pipe thread (National Pipe Taper Fuel), mechanically-sealing pipe thread Conicity: 1:16 Top angle: 60 ° Form: B Material: HSSE - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

Left-sided circular dies with jaws / threaded jaws Left-sided metric thread Tolerance: 6g (normal tolerance) Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210)

Zircon lamellar grinding wheel for grinding stainless steel and ordinary steel Diameter: according to the selected variant Grain: according to the selected variant Clamping diameter: 22.2mm (classic) Max. revolutions: see product description for individual variants Usage: steel / stainless steel, possibly brass, copper, aluminum, zinc Abrasive type: zircon-corundum - blue Suitable for surface preparation and finishing work, removing rust, sharp edges, cleaning weld seams and bevel grinding Suitable for various materials: steel, stainless steel INOX

Left holder for exchangeable slices, fastening with a screw Knife for internal turning Clamping diameter: according to the selected variant Marking of plates that fit into the holder: according to the selected variant (CCMT or CCGT) Angle of the plate to the axis: 95° Other dimensions - see product description for individual variants The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough with them and to machine better / longer even harder-to-machine materials.

Left holder for exchangeable slices, fastening with a screw Knife for internal turning Clamping diameter: according to the selected variant Marking of plates that fit into the holder: according to the selected variant (DCMT or DCGT) Angle of the plate to the axis: 107.5° Other dimensions - see product description for individual variants The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough with them and to machine better / longer even harder-to-machine materials.

Left holder for exchangeable slices, fastening with a screw Knife for internal turning, for internal cooling Clamping diameter: according to the selected variant Marking of plates that fit into the holder: according to the selected variant (DCMT or DCGT) Angle of the plate to the axis: 107.5° Other dimensions - see product description for individual variants The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough with them and to machine better / longer even harder-to-machine materials.

Left holder for exchangeable slices, fastening with a screw Knife for internal turning Clamping diameter: according to the selected variant Marking of plates that fit into the holder: according to the selected variant (TCMT or TCGT) Angle of the plate to the axis: 90° Other dimensions - see product description for individual variants The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. General information on choosing a suitable holder: Type "S" holders - with screw clamping are suitable for normal to finishing operations. They are suitable for smaller removals of material. The inserts for these holders have a positive back of the insert, which enables a sharper geometry of the inserts and thus the possibility of achieving a better surface quality. P, "M" , "T" , "C" and "D" type holders with thumb or clamp are suitable for normal to roughing operations - they have higher rigidity. The inserts for these holders have a negative (straight) back of the insert, thanks to which the inserts do not break / deform so much and it is possible to rough with them and to machine better / longer even harder-to-machine materials.

Zircon lamellar grinding wheel for grinding stainless steel and ordinary steel Diameter: according to the selected variant Grain: according to the selected variant Clamping diameter: 22.2mm (classic) Max. revolutions: see product description for individual variants Usage: steel / stainless steel, possibly brass, copper, aluminum, zinc Abrasive type: zircon-corundum - blue The abrasive is on a plastic holder with a viewing window Suitable for surface preparation and finishing work, removing rust, sharp edges, cleaning weld seams Suitable for various materials: steel, stainless steel INOX

Left-sided circular dies with jaws / threaded jaws Left-sided metric thread Tolerance: 6g (normal tolerance) Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: DIN 223 / DIN EN 22 568; replacement of ČSN 22 3210 / CSN 223210