Metalworking tools

Flange Clamp Flange ER32 for Lathe MN 80 Flange Diameter: 80mm Material: Steel Thread: M 39 × 4

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 80mm Flange diameter: 80mm Material: Steel Thread: M 39 × 4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 80mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 100mm Diameter flange: 100mm Material: Steel Thread: M 39 × 4

Flange for universal chuck KUS for lathe MN 80 Designed for universal chucks series KUS 100mm from our offer For chucks: IUS 100mm Flange diameter: 100mm Material: Steel Thread: M 39A — 4

Semi-finished flange for clamping universal chuck, for lathe MN 80 Diameter of flange: 100mm Flange is without machined mounting and without holes for chuck clamping. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Flange for universal chuck ITEM for lathe MN 80 Designed for universal chucks of the ITEM series 125mm from our offer Diameter Screws: 125mm Material: Steel Thread: M 39A — 4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 125mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Flange for universal chuck KUS for lathe MN 80 Designed for universal chucks series KUS 100mm from our offer For chucks: IUS 100mm Flange diameter: 80mm Material: Steel Thread: M 39A — 4

Overall length of threaded rod: 220mm Thread diameter: 10mm Bronze nut

Overall length of threaded rod: 298mm Thread diameter: 10mm Bronze nut

Improved gear wheel - accommodation of the shift shaft Compared to the original gear wheel, which was supplied with the MN80 lathes, this one also has an encapsulated opening with sliding bronze, which is pressed there under enormous pressure. Attention - two types were used for the MN80 lathe: 1. Gear wheel with a cylindrical diameter of 30 mm and a length of 22 mm (the same diameter as the hole in the lyre) 2. Gear wheel with a cylindrical diameter to press 30mm in a length of 14mm and a setting of 32mm in a length of 8mm (the lyre has a hole with a diameter of 32mm) If you need type 2 with mounting, please add this to the order notes. The gearing is very precisely rolled. All sanded.