Metalworking tools

Turning knife left with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223713 / CSN 22 3713, DIN4972, DIN4972L, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Turning knife left with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223713 / CSN 22 3713, DIN4972, DIN4972L, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

American hand tap UNC Climb: basic Fitting: 2B Standard: DIN 352 Material: NO - Tool Steel UNC - Unified coarse thread (it is a unification of American and British whitworth thread) NO taps are suitable for thread stretching or for piece thread cutting.

American hand tap UNC Climb: basic Fitting: 2B Standard: DIN 352 Material: HSS - High speed steel UNC - Unified coarse thread (it is a unification of American and British whitworth thread)

Fixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243311 / ČSN 24 3311 / DIN806 / DIN 806

Quick-change round knife holder for multi-fix Size: according to the chosen variant Suitable for head / multifix: according to the selected variant Other dimensions - see attached catalog sheet

Hand tap UNC Thread type: UNC - American unified coarse thread (it is a unification of American and British whitworth thread) Climb: basic Matching: 2B Material: HSS - High speed steel Standard: DIN 352 HSS taps are suitable for tapping common steels (up to 800MPa)

Left hand tap UNC Thread type: UNC - American unified coarse thread (it is a unification of American and British whitworth thread) Pitch : basic Matching: 2B Material: HSS - High speed steel Standard: DIN 352 HSS taps are suitable for tapping common steels (up to 800MPa)

Hand tap UNF Thread type: UNF - American unified fine thread (it is a unification of American and British whitworth thread) Pitch : soft Matching: 2B Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 800MPa)

Left hand tap UNF Thread type: UNF - American unified fine thread (it is a unification of American and British whitworth thread) Pitch: soft Matching: 2B Material: HSS - High speed steel Standard: DIN 2181 HSS taps are suitable for tapping common steels (up to 800MPa)

Threaded dies with jaws / threaded jaws Metric thread Tolerance: 6g (normal tolerance) Material: HSSE - High speed steel + Co5 Dimensions - see attached catalog sheet Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210)

Grinding stone, grinding body on shank, type 52KU Diameter: according to the selected variant Clamping shank: according to the selected variant Clamp shank length: according to the selected variant Grain: according to the selected variant Abrasive type: artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, stainless steel, cast iron