Metalworking tools

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 22100

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No .: 22.1020

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable coolant plates and rings are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221030

VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221040

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Working part diameter: according to the selected variant, tolerance h6 Top angle: 120 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Threaded dies with jaws / threaded jaws Metric thread Tolerance: 6e (plus tolerance for surface treatment - galvanizing, etc.) Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210)

Threaded dies with jaws / threaded jaws, with brass breaker Metric thread Tolerance: 6g (normal tolerance) Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210)

Grinding stone, grinding body on shank - type 52KE Diameter (max): according to the selected variant Abrasive length: according to the selected variant Clamping shank: according to the selected variant Clamp shank length: according to the selected variant Radius: according to the selected variant Grain: according to the selected variant Abrasive type: artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, stainless steel, cast iron Usage: For internal grinding, machining of dies and molds

Grinding stone, grinding body on shank - type 52KE Diameter (max): according to the selected variant Abrasive length: according to the selected variant Clamping shank: according to the selected variant Clamp shank length: according to the selected variant Radius: according to the selected variant Grain: according to the selected variant Abrasive type: light pink artificial corundum, ceramic binder Recommended use: steel up to 55 HRC, stainless Possible use: steel class 11, steel up to 67 HRC Usage: For internal grinding, machining of dies and molds

Grinding stone, grinding body on shank, type 52ZE Diameter (max): according to the selected variant Abrasive length: according to the selected variant Clamping shank: according to the selected variant Clamp shank length: according to the selected variant Grain: according to the selected variant Front angle: 60° Abrasive type: artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, stainless steel, cast iron Usage: For internal grinding, machining of dies and molds

External replaceable blade thread insert 11 EL W Size: 11 Number of strokes per inch: according to the selected variant Full profile / partial profile: depending on the selected variant Apex angle: 55° Design of the plate: left Height (to edge): 3.2mm Suitable for cutting an external inch whitworth thread W (category BSW,BSF,BSP,BSB) Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see the attached catalog, page no. 56 (sheet no. 60). Cat. No. : The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.