Metalworking tools

Carbide (TK) torus cutter with corner radius Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for finishing operations Structural steels up to 500 N / mm2 Suitable for machining cast iron, non-ferrous metals, light and heavy metals, plastics, aluminum alloys, non-ferrous metals and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) torus cutter with corner radius and diamond coating for milling materials with HRC

Carbide (TK) taper milling cutter with corner radius for milling materials with HRC

Carbide (TK) taper milling cutter with corner radius for milling materials with HRC

Pushing mandrel for pen groove For groove width: according to the selected variant Total length of mandrel: according to the selected variant Material: HSS Usage : A groove for the pen is pushed through the guide/insert using a mandrel. Used together with a manual / hydraulic press. A mat is included in the package.

Grinding stone, grinding body on shank, type 52ZY Diameter: according to the selected variant Abrasive length: according to the selected variant Clamping shank: according to the selected variant Clamp shank length: according to the selected variant Grain: according to the selected variant Abrasive type: artificial white corundum, ceramic binder Recommended use: steel class 11 Possible use: steel up to 55 HRC, stainless steel, cast iron

Grinding stone, grinding body on shank, type 52ZY Diameter: according to the selected variant Abrasive length: according to the selected variant Clamping shank: according to the selected variant Clamp shank length: according to the selected variant Grain: according to the selected variant Abrasive type: light pink artificial corundum, ceramic binder Recommended use: steel up to 55 HRC, stainless steel Possible use: steel class 11, steel up to 67 HRC

Carbide ( TK ) milling cutter for milling, grooving, contouring of composite materials / without front edges / series 116001 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with front edges / series 116002 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with two front edges / series 116003 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) milling cutter for milling, grooving, drilling and contouring of composite materials / with drill tip / series 116004 Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Clamping shank: according to the selected variant Coating: without coating Usage : Suitable for milling, grooving, drilling and contouring of composite materials, plexiglass, graphite, carbon, printed circuit boards, GFK, CFK, MMC materials, etc.

Carbide ( TK ) multifunctional / universal milling cutter made of cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h6 Coating: according to the chosen variant of the variant Apex angle: 60° Other dimensions - see the attached catalog sheet Standard: PN-ZPS, DIN 6535 HA Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S390002.060 (AlTiN)