Metalworking tools

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Other dimensions - see attached photo Standard: DIN2080 / ČSN 247227.1 / 24 7227.1 / 24 7227 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

Clamping collet series: ER 11 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 4008E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 11mm Length: 18mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Miller for prismatic (dovetail) guides (dovetail) with cylindrical shank Cutter angle: according to the selected variant Cutter diameter (maximum): according to the selected variant Clamping shank: according to the selected variant Other dimensions - see product description for individual variants Material: HSS Standard: company standard Zbrojovka Vsetín

Threaded dies with jaws / threaded jaws Metric thread Material: NO - Tool Steel Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210) Final sale round dies from excess stock - made in 19xx, unused

Threaded dies with jaws / threaded jaws Metric thread Material: NO - Tool Steel Standard: ČSN EN 22 568 / CSN EN 22568 (ČSN 22 3210 / CSN 223210) Final sale round dies from excess stock - made in 19xx, unused

Carbide ( TK ) cutter for milling grooves, long - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 30° Head angle: 12° Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA or DIN 6535 HB Carbide: K30 F - ultra-fine grain carbide, high hardness and abrasion resistance, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S101402 and S101412

Carbide ( TK ) cutter - from cemented carbide, 1 cutting edge through the center - suitable for ALU, AL-alloys and non-ferrous metals Number of blades: 3 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Version without weldon surface / with weldon surface: depending on the selected variant Helix angle: 45° Head angle: 15° Other dimensions - see the attached catalog sheet Coating: without coating Usage: Type W - for machining soft tools, e.g. aluminum and non-ferrous metals. Aluminum, Al-Si alloys (Si < 6%) Al-Si alloys (Si < 12%) Copper, copper alloys, brass and bronze Cutting conditions - see attached photo or catalog sheet Order no. no.: series S111402 and S111412

Carbide ( TK ) cutter - from cemented carbide, 1 cutting edge through the center - suitable for ALU, AL-alloys and non-ferrous metals Number of blades: 3 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Corner radius: according to the selected variant Version without weldon surface / with weldon surface: depending on the selected variant Other dimensions - see product description for individual variants Helix angle: 44-46° Head angle: 15° Coating: ZrN - Coating with high corrosion resistance and high resistance to adhesion of non-ferrous metals. Machining of Al alloys with a lower Si content, or machining of plastics and copper. Usage: Type W - for machining soft tools, e.g. aluminum and non-ferrous metals. Aluminum, Al-Si alloys (Si < 6%) Al-Si alloys (Si < 12%) Copper, copper alloys, brass and bronze Cutting conditions - see attached photo or catalog sheet Order no. No. : series S111402R and S111412R

Carbide ( TK ) cutter for milling grooves, short - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Head angle: 15° Other dimensions - see the attached catalog sheet Standard: ZPS-FN Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: without coating Usage : Aluminium, Al-Si alloys with Si content < 6% with strength up to 400N/mm2 Al-Si alloy with Si content

Carbide (TK) roughing end mill for milling (grooves), long - made of cemented carbide, suitable for aluminum and non-ferrous materials Number of blades: 3 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 25° Head angle: 15° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: PN-ZPS, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: without coating Usage : Non-ferrous metals up to 250 MPa Aluminum alloys up to 530 MPa Type WR: For roughing materials with lower to medium strength. Cutting conditions - see attached photo Order no. No. - series: S115402

Carbide ( TK ) roughing cutter short - made of cemented carbide Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 45° Brow angle: 6° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Standard: DIN6527K, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Air cooling. Coating: PVD ( AlCrN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Type HR: For roughing materials with medium to higher strength. Cutting conditions - see attached photo Order no. No. - series: S118602N

Carbide ( TK ) roughing cutter long - made of cemented carbide Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 45° Brow angle: 6° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527K, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Air cooling. Coating: PVD ( AlCrN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Type HR: For roughing materials with medium to higher strength. Cutting conditions - see attached photo Order no. No. - series: S119602N