Metalworking tools

Carbide ( TK ) copying - ball mill, long - from cemented carbide Number of blades: 2 pcs. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 30° Head angle: 12° Radius: according to the selected variant (D/2) Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlTiN ) Usage : Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Cast iron Non-ferrous metals up to 250 MPa Aluminum alloys up to 530 MPa Hardenable (hardened) steels Cutting conditions - see attached photo Order no. No. - series: S511602

Carbide copying (TK) milling machine for radii Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Cutting angle of spherical end: 220 ° For other dimensions, see the attached photo. Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, hardened materials, stainless steels Cutting conditions - see attached photo

Carbide copying (TK) milling cutter for long radii Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° For other dimensions, see the attached photo. Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for roughing and finishing operations Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, hardened materials, stainless steels Cutting conditions - see attached photo

Carbide (TK) corner milling cutter for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steel Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide roughing ( TK ) milling cutter with interrupted edge Number of blades: 4 blades. Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Total length: according to the selected variant Screw: 30° Clamping shank: see attached catalog sheet Carbide : super fine grain carbide Coating: PVD ( AlTiN ) Tolerance of the cutting edge diameter: -0.015mm for cutters up to 5mm in diameter (included) -0.020mm for cutters from diameter 6mm (included) Usage : Type NR - Roughing milling with the resulting machining Ra 12.5 and rougher, the cutter has 2 cutting edges through the middle. Suitable for machining nickel, cast iron, non-ferrous metals, plastics, stainless steels and austenitic steels up to 55 HRC Suitable also for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 43 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Rough milling, roughing cuts on the cutter leave no traces, the cutter has 2 cutting edges through the center, reinforced core Suitable for machining tough steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide drill for hardened steel TK / HA / PVD 22.0468 Average: according to the selected variant Blade diameter tolerance: m7 (plus tolerance) Helix angle: 15 ° Tip angle: 140 ° Coating: Balinit Hardlube Carbide: Micro-grain Norma: Karnasch Usage: For hardened materials - steels up to 70 HRC Cutting conditions - see attached PDF

Carbide drill for hardened steel TK / HA / PVD 22.0468xxxx0xx Average: according to the selected variant Helix angle: 15 ° Tip angle: 140 ° Coating: Balinit Hardlube Carbide: Micro-grain Norma: Karnasch Usage: For hardened materials - steels up to 70 HRC Cutting conditions - see attached PDF

Two-stage cobalt drill Drilling diameter / countersinking diameter: according to the selected variant Tip angle: 118° Material: cobalt HSS-XE steel Coating: PVD TiAlN, TITAN-TEC Standard: DIN8374 Suitable for screws according to the standard: DIN-ISO 273, ISO 2009, ISO 2010, ISO 7046 / DIN 963, DIN 964, DIN 965, DIN 966 Usage : Steel with strength up to 500N/mm2 Steel with strength up to 800N/mm2 Steel with strength up to 1000N/mm2 Stainless steel with strength up to 900N/mm2 Stainless steel with strength over 900N/mm2 Cast iron, aluminum Cutting conditions - see attached photo

Two-stage cobalt drill Drilling diameter / countersinking diameter: according to the selected variant Tip angle: 118° Material: cobalt HSS-XE steel Coating: PVD TiAlN, TITAN-TEC Standard: DIN8376 Suitable for screws with a through hole according to the standard: DIN-ISO 273 Usage : Steel with strength up to 500N/mm2 Steel with strength up to 800N/mm2 Steel with strength up to 1000N/mm2 Stainless steel with strength up to 900N/mm2 Stainless steel with strength over 900N/mm2 Cast iron, aluminum Cutting conditions - see attached photo

Two-stage cobalt drill Drilling diameter / countersinking diameter: according to the selected variant Tip angle: 118° Material: cobalt HSS-XE steel Coating: PVD TiAlN, TITAN-TEC Standard: DIN8378 Usage : Steel with strength up to 500N/mm2 Steel with strength up to 800N/mm2 Steel with strength up to 1000N/mm2 Stainless steel with strength up to 900N/mm2 Stainless steel with strength over 900N/mm2 Cast iron, aluminum Cutting conditions - see attached photo

Short NC countersinking two-stage drill Drilling diameter / countersinking diameter: according to the selected variant Tip angle: 118° Material: cobalt HSS-XE steel Coating: PVD TiAlN, TITAN-TEC Standard: DIN1897 Suitable for screws according to the standard: DIN-ISO 273, ISO 2009, ISO 2010, ISO 7046 / DIN 963, DIN 964, DIN 965, DIN 966 Usage : Steel with strength up to 500N/mm2 Steel with strength up to 800N/mm2 Steel with strength up to 1000N/mm2 Stainless steel with strength up to 900N/mm2 Stainless steel with strength over 900N/mm2 Cast iron, aluminum Cutting conditions - see attached photo