Metalworking tools

Multi-edged conical countersink Max. diameter: according to the selected variant Number of cutting edges: see product description for the selected variant Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSS - high speed steel Standard: DIN 335 A / corresponds also to ČSN 221627

Multi-edged conical countersink Max. diameter: according to the selected variant Number of cutting edges: see product description for the selected variant Clamping shank: see product description for selected variant Blade angle: 60st. Material: HSS - high speed steel Standard: DIN 334 A / corresponds also to ČSN 221627

Threaded bit for cordless drill with hexagonal shank 1/4 " Matching: 2N Material: HSS - High speed steel Standard: PN 8/3016 Use: Thread cutting in a cordless drill, also suitable for quick repair (stretching) of threads

Holder for trapezoidal parting blade ČSN 223693 For radeco with clamping height: according to the selected variant Clamping height of the holder: see product description for individual variants Axial height: see product description for individual variants Material: hardened steel - Czech production Radeco slices must be made according to standard: ČSN 223693/22 3693 Price includes holder only, advice must be purchased separately - see related products

Handle for VERTEX drill chuck Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. collar diameter: see description of the selected variant Max. collar diameter: according to the selected variant Before ordering a loop, compare the parameters with your used handle or chuck. We do not guarantee compatibility with old Czech chucks and chucks of brands other than Vertex - each manufacturer uses different types of loops.

Lathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243310 / CSN 243310 Fixed tips are Czech-made, unused, come from excess stock. Only a limited selection.

Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.

Machine drill with cylindrical shank, with three cutting edges Average: according to the selected variant Tolerance: Nominal dimension in tolerance h8 for hole with allowance for further more precise machining Other dimensions - see enclosed catalog sheet Material: HSS - high-performance high-speed steel Standard: ČSN 221480 / CSN 22 1480 / DIN344 / DIN 344 / ISO 7079 Usage: Machining of pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy.

Quick-clamping knife holder multifix - head with holders for classic and round knives Size: according to the chosen variant Other dimensions - see attached catalog sheet When replacing the knife holders in the head, the repeatable clamping accuracy is 0.01 mm. The head offers 40 different adjustment positions, quick and easy height adjustment via a slotted screw Quick clamping of the exchangeable holder is performed by a quick-release lever. There is a scale 0-40 on the clamping head - see photo Kit includes: 1x clamping head 3x holder for square knives (type D) 1x holder for round knives (type B) 1x handle for locking the holder in the knife head 1x handle for tightening square screws in knife holders Attention - the screw for attaching the knife head to the lathe support needs to be modified or a new one is made - it is not part of the package.

Countersink for inserts / countersinks for inserts Range: according to the chosen variant Number of beds: 3 Chamfer / countersink angle: 45 ° / 90 ° Clamping shank: see description of selected variant Overall length: see description of selected variant The holders are without exchangeable plates. The plates fit into the holder: see the description of the selected variant Application: Ideal for roughing and machining common steels and cast iron, using suitable inserts (TPKR with chip breaker) and stainless steel.

Trapezoidal hand tap Tr Tolerance: 7H Material: HSS - High speed steel Standard: ČSN 22 3090/223090, DIN103 Other dimensions - see attached photo or catalog sheet.