Metalworking tools

Front and corner milling head for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type VBD - triangular positive: according to the selected variant (TPUN 2603 / TPKR 1603 / TPKN 1603 / TPCN 1603 / TPMN 1603) Angle: 90° The packaging is without VBD It is a so-called peeling cutter - the plates do not have chip breakers - they are flat. Suitable for machining cast iron, or ordinary steel and, in an emergency, stainless steel (for stainless steel, use inserts with a chip breaker - type TPKR 2204, brand Iscar).

Front milling head for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type VBD - triangular positive: according to the selected variant - type RDMT 10T3 The packaging is without VBD Suitable for small removal - leveling of surfaces, large areas, etc.

3bř. cobalt taper countersink Maximum diameter: according to the selected variant Minimum diameter: see product description for selected variant Clamping shank: see product description for the selected variant, with three anti-rotation surfaces Edge angle: 100st. Overall length: see product description for selected variant Material: HSS-XE - High speed steel + Co5 The countersink has an irregular groove geometry, which significantly reduces vibrations and increases the life of the countersink. Application: Deburring and countersinking of classic steels, stainless steels (V2A / V4A) with strength up to 900MPa, cast iron and non-ferrous metals and plastics

Centering drill, carbide drill, single sided Type: A Drilled diameter: according to the selected variant Centering angle: 60 ° Helix: 30 ° - 35 ° Material: Carbide - carbide / carbide K20 / K30, DIN6535 PVD coating

Professional shaping head for the production of internal polygonal profiles: squares, hexagons (hexagon sockets), TORX, TORX + and other profiles for lathe, milling machine, drilling machine and machining center For punches of type: according to the chosen variant Clamping cylindrical shank: according to the selected variant Other dimensions - see enclosed catalog sheet The heads are without internal cooling (on request) - unless otherwise stated in the list of variants. Scope: See attached catalog sheet Usage (see attached video): Production of square, hexagonal and other profile holes on a lathe, milling machine, drilling machine or machining center For machining materials: steel, stainless steel, titanium, aluminum, copper, brass, cast iron - with max. strength up to 1400MPa The head works on the principle of embossing / extrusion - see the attached video. It is necessary to buy shaping attachments (punches) for the head - see related products or the enclosed catalog sheet. If you do not find a suitable punch, we can supply punches made to order - according to your requirements. Delivery time for non-stock items (heads and attachments) is 5-7 days, for custom production usually 2 weeks.

Lathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: DIN806 / DIN 806 / replacement ČSN 243310 / CSN 243310

Drill with conical shank Diameter: according to the selected variant Total length / helix length: according to the selected variant Clamping stem: morse taper Material: HSS Other dimensions - see product description for individual variants Standard: ČSN 221150 Czech production

Exrta long drill with taper shank, morse taper Average: according to the selected variant Overall length / helix: according to the selected variant Cone: see product description for individual variants Helix: 25 to 30 ° Top angle: 118 ° Podbrus type C Drilling depth: 5xD Material: HSS Drill production technology: milled / blackened Standard: ZV5001 / DIN341 / DIN 1870 RN / replacement for ČSN 221150 Usage: Extra long drills recommended for drilling deep holes through drill bushes in components made of non-alloy and alloy steel, steel castings up to 900N / mm2, gray, malleable and ductile iron, sintered steel, etc. When drilling deep holes, it is necessary to prevent clogging of grooves by frequent by rinsing the drilled hole. Due to the poor supply of cutting fluid, it is necessary to reduce the recommended cutting conditions.

Fine-tooth circular circular saw Diameter: according to the selected variant Disc width: according to the selected variant Diameter of the clamping hole: according to the selected variant Material: HSS - unless otherwise stated Usage: steel, cast iron, non-ferrous metals, plastics Standards: CSN 222910.1 - disc with body grinding towards the center - does not grip the material CSN 222910 - disc with full body profile

Turning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223710 / CSN 22 3710, DIN4971, DIN4971R, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Turning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223710 / CSN 22 3710, DIN4971, DIN4971R, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Taper drill bit / countersink Working range: according to the selected variant Other dimensions - see attached photo. Material: HSS - high speed steel