Metalworking tools

Threaded eye with jaws / Threaded eye with jaws Size M 16 mm Pitch: 2.0, ie positive thread M16x2,0 Tolerance: 6g Metric thread Outer eye diameter: 45mm Standard: A „A’SN EN 22 568 / CSN EN 22568(A„ â € SN 22 3210 / CSN 223210) Material: HSSE - High speed steel Co5 Coating: uncoated

Threaded eye with jaws / Threaded eye with jaws Size M 16 mm Pitch: 1.5, ie fine A „â € SN 22 3210 / CSN 223210) Material: HSSE - High speed steel Co5 Coating: without coating

Set of 81 pcs of ground cobalt spiral drills for metal with reinforced core 2.0-10.0 mm Top angle: 128  ° special cut according to DIN 1412, shape C( for heavy-duty machining of stainless steels and special materials) Helix angle: 35-40  ° Material: HSS Co5(5 o5) Standard: DIN338 GT100(replaces PN 2907 T1000) Cobalt tungsten-molybdenum steel with very good cutting properties, hardness at elevated temperatures and toughness, suitable for heavy Highly machinable materials. Plastic order with cover. Application: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolling mill rolls, steel for cementing and tempering Compared to the "RTi" profile, these drills have an even stronger core and the helix is ??â € ‹â €‹ denser. High rigidity during drilling, for material forming a brittle chip and material with high strength - tough.

Threaded eye left with jaw / threaded eye with jaws Size M 5 mm Gradient: 0,8, ie basic M5x0,8 LH (5x0,8 LH) Tolerance: 6g Metric thread left Ejector outer diameter: 20mm CSN EN 22 568 / CSN EN 22568 (CSN 22 3210 / CSN 223210) - Material: HSSE - High-speed steel Co5

Changeable Speed ??Disc Disc with Quick Change Disc - QRC411 Diameter: 76mm Clamp Type: QRC Grain Size: 60 Usage: Aggressive Sharpening of Standard and Stainless Steel thanks to the self-sharpening zircon corundum. High abrasion. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.

Exchangeable Speed ??Disc Disc with Quick Change Disc - QRC411 Diameter: 76mm Type of Clamping: QRC Grain: 80 Application: Aggressive Sanding of Standard and Stainless Steel thanks to the self-sharpening zircon corundum. High abrasion. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.

Changing Disc with Quick Change Disc - QRC800 Brown Diameter: 76mm Type of Clamping: QRC Grain: Coarse (COARSE) Usage: Lightweight Discharge, removing rust and paint. Suitable for all types of metals, paint, varnish and putty. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.

Changeable Disc with Quick Change Disc - QRC800 Red Diameter: 76mm Type of Clamping: QRC Granularity: Medium (Medium) Usage: Lightweight Discharge, removing rust and paint. Suitable for all types of metals, paint, varnish and putty. The quick-change threaded disc is simply screwed onto the support plate. Underlay Rubber Plates - See the attached catalog sheet. Also suitable for pneumatic grinder GISON - see related products.

Extra long right-hand twist drill for steel with cylindrical shank Diameter: 7.0mm Drill length / helix length: 290/200mm Blade angle: 118° Helix angle: 25° to 30° Material: HSS High-speed steel Standard: DIN1869, ZV 3001 Usage: Especially long drills recommended for drilling deep holes through drill bits housings in parts made of unalloyed and alloyed steel, cast steel up to a strength of 900 N/mm2, gray, tempered and malleable cast iron, sintered steel, etc. When drilling deep holes, it is necessary to prevent clogging of the grooves by frequently moving the drill out of the drilled hole. In view of the poor supply of cutting fluid, it is necessary to reduce the recommended cutting conditions. Cat. No. : A180702V000S

Insert screw: SPMG 050204 Suitable for drill bits: ATUM SP .. with a diameter of 12.5 to 15.0 mm(incl.) Torx: T6

Insert screw: SPMG 060204, TCMT 0902 Suitable for drill holders: ATUM SP .. with a diameter of 12.5 to 15.0 mm( etnÄ) Torx: T7

Suitable for milling heads AKKO with VBD APKT 1003