Metalworking tools

The photo is illustrative - new - we will take a photo immediately after stocking. Set of 25 pcs - 3-edged right-cut ground spiral cobalt drill bits for steel and stainless steel with cylindrical shank Set contains diameters: 1.0-13.0mm x 0.5mm Length of the drill: Short series - lengths see attached photo Material: HSSE - High-speed steel Co5 / HSSCo5 Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: Stand and column drills, NC and CNC machines, possibly even hand drills. Structural steel Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2 Stainless steel Wrought aluminum alloys and other aluminum alloys Advantages: Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved. Thanks to three blades, the feed can be increased by up to 60%. The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes. The drill does not jam when re-drilling an existing hole. The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades. Cat. no.: 283057025

Set of 5 pcs multi-purpose right-cut ground twist drills / "tooth drills" with cylindrical shank - with graduated tip Set includes drill bits: 4 / 5 / 6 / 8 / 10 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hard wood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - no need to pre-drill the hole with a smaller average. Perfect for tapping Cat. no.: 283064005

Set of 24 pcs multi-purpose right-cut ground spiral drills / "tooth drills" with cylindrical shank - with graduated tip The set includes drills: 1.0-10.5mm x 0.5mm drills 3.3 / 4, 2 / 6.8 / 10.2 mm Drill length: Short series - lengths see attached photo Material: HSS - High-speed steel Standard: DIN338 ( replaces PN 2907 / PN2907 ) Usage: - universal Steel, cast iron, hardwood, plastic, acrylic glass, non-ferrous metals Advantages: Universal use Easier drilling - it is not necessary to pre-drill a hole with a smaller diameter. Perfect for tapping Cat. no.: 283064024

Thread Metric Threaded Thread Special Fiber for Repairing Outside and Inside Right and Left Metric Threads. You can repair threads with this climb (all on one file): M 0,8 - M1,0 - M1,25 - M1,5 - M1,75 - M2,0 - M2,5 - M3,0 To correct the internal threads (mothers), the file ends are used. On each side, 4 kinds of thread pitch are adapted to thread the damaged thread. Correcting the external threads (screws) is done flats closer to the center of the file. Obj. number: 286211702310

Threaded Threaded Threaded Thread for All Thread UN (UNC and UNF) CSN ISO 68-2 Special file for repair of UNC and UNF internal threads (top angle 60 °). Repair threads with this climb (all on one file): 11-12-13-14-16-18-20-24 For the repair of internal threads (mothers), the ends of the file are used. On each side, 4 kinds of thread pitch are adapted to thread the damaged thread. Correcting the external threads (screws) is done flats closer to the center of the file. Obj. number: 286211702330

Threaded Threaded File BSW - WW Special file for repairing external and internal threads. 10, 11, 12, 14, 16, 18, 20 and 24 strokes per inch can be corrected with this climb (all on one file) For the repair of the internal threads (mothers) the ends file. On each side, 4 kinds of thread pitch are adapted to thread the damaged thread. Correcting the external threads (screws) is done flats closer to the center of the file. Obj. number: 286211702340

Needle fileter PJC 140/3 Length: 140 mm Square: 3,5mm Sek: 3 - fine (see enclosed table) Roughness of Files is given by the number of choppers per centimeter of length. Number of teeth according to DIN 8349 Art. number: 28621383 1430

Round Needle File PJK 140/0 Length: 140 mm Diameter: 3mm Sek: 0 - ie rough (see attached table) File size is determined by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Art. number: 28621384 1400

Round Needle File PJK 140/1 Length: 140 mm Diameter: 3mm Sek: 1 - ie rough (see attached table) The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Art. number: 28621384 1410

Round Needle File PJK 140/4 Length: 140 mm Diameter: 3mm Sek: 4 - ie fine (see attached table) The roughness of the files is given by the number of cuts per centimeter of length. Number of teeth according to DIN 8349 Art. number: 28621384 1440

Threaded eyelet with jaws / Threaded eyelet with jaws Size M 12 mm Pitch: 1.25, ie fine M12x1.25 Tolerance: 6g Metric thread Outer eye diameter: 38mm Standard: A „A’SN EN 22 568 / CSN EN 22568( A„ â € SN 22 3210 / CSN 223210) Material: HSSE - High speed steel Co5 Coating: without coating

Set of circular jaws of Czech production MINI-1 Set of die-cut tools Range: M3-M12 Set contains: Circular jaws: M3, M4, M5, M6, M8, M10, M12 Eyelet: 25mm and 38mm, inserts 38/30 and 25/20 Material: HSSE - high-speed steel (HSS Co5)