Metalworking tools

Interchangeable TN 22IRN55 Edge Threaded Insert - Universal 55° N55 Size : 22 Pitch : 5 - 7 runs per inch Peak angle : 55° Height (to edge) : 4.71mm Suitable for cutting internal thumb threads, pitch 5 - 7 strokes per inch Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, unconventional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56 (sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Outer plate for outer knife - for trapezoidal thread Cutter / plate for cutting outer traps Threaded threads 22U ER / L 7 TR Trapezoidal thread cutters with a pitch of 7 mm Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high Cutting speeds < b> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel( Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 22U IR/L 6 TR Inserts for cutting trapezoidal threads with a pitch of 6 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 22U IR/L 7 TR Inserts for cutting trapezoidal threads with a pitch of 7 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 22U IR/L 8 TR Inserts for cutting trapezoidal threads with a pitch of 8 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external replaceable cutting insert 22 V EL N60 BMA / 22 V IR N60 BMA Size: 22 Gradient: 0,5 - 5,0 Height 4mm | Plate is inserted into vertical brackets - the cutting edge is visible on the second photo. Coating: PVD TiALN Material: BMA - Universal Application, Suitable for Classical and Stainless Steel, Non-traditional Materials, for Normal to High Cutting Speed ?? Application : Steel: P20-P40 Stainless Steel Cast Iron: K20-K30 Heat Resistant Steel (Ni, Co, Fe, Ti) enclosed catalog, page 56 (sheet 60).

Vertical external replaceable cutting insert 22 V ER N60 BMA / 22 V IL N60 BMA Size: 22 Gradient: 0,5 - 5,0 Height 4mm | Plate is inserted into vertical brackets - the cutting edge is visible on the second photo. Coating: PVD TiALN Material: BMA - Universal Application, Suitable for Classical and Stainless Steel, Non-traditional Materials, for Normal to High Cutting Speed ?? Application : Steel: P20-P40 Stainless Steel Cast Iron: K20-K30 Heat Resistant Steel (Ni, Co, Fe, Ti) enclosed catalog, page 56 (sheet 60).

Set of short three-cut grooving machines with item over center(drilling) with weldon face Set contents: 4x7, 5x8, 6x8, 8x11, 10x13, 12x16 mm Tolerance of cutting diameter accuracy: e8 Clamping shanks: 6mm(d4 d5 d6), 10mm(d8 d10), 12mm(d12) Number of bars — itA… —: 3 bA… â „c. Material: HSSCo8(contains 8 packs) Standard: DIN 1835 B, DIN 327 Application: For machining in 3 axes For materials with strength up to 900MPa(for more see Figure 2) Ord. Code: 230418.SET4-12

Overall Length: 170mm Pin Diameter: 7,5mm For Collet Clamp - Small Yoke: 44mm 220731/22 0731

9x19 mm Slot Cutter (9x19mm) with Spherical Shank Ends with Slot for Welding Clamp Diameter D (e8): 9 mm Cutter Length l: 19mm Clamping Shank D (9mm) h6): 10mm Overall length: 69mm Number of bits: 3 Material: HSSCo8 (contains 8% cobalt) Helix Angle: 30 ° Face Angle: 12 ° DIN 1835 B, DIN 327 Application : For 3 Axis Machining For Materials With Strength Up to 900MPa (for more details, see Figure 2) Ref. code: 231418.090

American hand tap UNC 1-64 - set Size: UNC no. 1 (corresponds to 1.854mm) DIN 352 UNC - Uniform Thread Coarse unification of American and British whitworth threads)

American hand tap UNC 2-56 - set Size: UNC no. 2 (corresponds to 2,184mm) Gradient: 56 turns per inch, basic Face: 2B DIN 352 Material: HSS - Rapid Steel - UNC - Uniform Thread Coarse unification of American and British whitworth threads)