Metalworking tools

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: MAS BT / JIS 6339 B - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine, NC - with automatic tool change This mandrel can also be used in machines with manual tool change.

Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: steep ISO cone - size according to the selected variant Tightening / loosening: hook wrench with tooth The key is not included in the package. Standard: JIS 6339 BT - automatic tool change Accuracy / throw - see the description of the selected variant Application: milling machines and CNC with exchanger type JIS 6339 MAS BT Alternatively, these chucks can also be clamped in machines with manual tool change

Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: steep ISO cone - size according to the selected variant Tightening / loosening: hook wrench with tooth The key does not have to be part of the package - see photo or description of the selected variant Standard: JIS 6339 BT - automatic tool change Accuracy / throw - see the description of the selected variant Application: milling machines and CNC with exchanger type JIS 6339 MAS BT Alternatively, these chucks can also be clamped in machines with manual tool change

Carbide core drill / puncher / drill bit is made of one piece - including shank. Diameter: according to the selected variant (average tolerance 1mm) Drilling depth: 25mm It has powered carbide teeth, which allow easier drilling with less pressure force. Precise guidance is ensured by a removable guide drill with a diameter of 6 mm. The spring on the drill bit is used for easy removal of the drilled material. The guide drill is secured with an Allen key. The drill has a ground surface. The teeth are 3 mm wide, which ensures more economical drilling. The clamping shank is adapted for clamping in a three-jaw chuck. Application: Column drill , or hand drill with drills up to a diameter of about 40-50 mm - but it is necessary to keep the drilling axis and always keep all the cutting edges in engagement. If you do not keep all the blades in engagement or you are not able to keep the drill in the drilling axis (jerks, shocks, etc.), the carbide blade may be chipped - ie irreversible damage to the tool.

Machine tap, straight groove, for conical pipe thread Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: C Material: HSSE - High speed cobalt steel Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

Machine tap (quick-cutting) without chip breaker with straight groove with conical pitch Size: according to the selected variant Ascent: according to the chosen variant Form: C (2-3 starting threads) Material: HSSE ( High speed steel +5% Cobalt ) Coating: without coating Thread type: NPT - American conical thread with a pitch of 1:16 Usage: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

HSSE-PM sintered steel set tap The pre-cutting tap has an insert with a drill diameter under the thread Fitting: AX Standard: DIN 5157, DIN-ISO 228 Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Extended right-handed ground twist drill for steel with cylindrical shank Drill length: Extended range - lengths see attached photo Drilling depth: 10xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS - High speed steel Standard: PN 2916, DIN 340 RN Usage: General - hand, stand, column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.

Extended right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Extended range - lengths see attached photo Drilling depth: 10xD Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSSE - High speed steel + Co5, HSSCo5 Standard: PN 2916, DIN 340 RN Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Titanium alloys, heat-resistant steels, austenitic steels resistant to corrosion (stainless steels) and acids

Extended right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Extended range - lengths see attached photo Drilling depth: 10xD Edge angle: 130 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 36 ° Material: HSSE - High speed steel + Co5, HSSCo5 Standard: PN 2915, DIN 340 RN Usage: General - hand, stand, column drills Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Titanium alloys, heat-resistant steels, austenitic steels resistant to corrosion (stainless steels) and acids

Hand set tap G for pipe thread Climb: basic Fitting: A Material: HSS - High speed steel Standard: ČSN 22 3012 / CSN 223012

Conical countersink with one cutting edge Max. diameter: according to the selected variant Number of edges: 1 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSS - high speed steel