Metalworking tools

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 4-20mm Diameters: 4 - 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 mm Number of edges: 2 Shank diameter: 8 mm, with three faces against rotation in the chuck Total length(vč. shank): 75mm Max. drilled material thickness: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: 1600 to 320 rpm Cutting conditions - stainless steel: 800 to 160 rpm Smaller diameters can be drilled at at higher speeds, with increasing drilling diameter, the cutting speed and speed need to be reduced. Failure to speed up or overheat the drill may cause it to become dull. At the same time, transitions to a larger diameter perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 6-32mm Diameters: 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 - 26 - 28 - 30 - 32 mm Number of cutting edges: 2 Shank diameter: 10 mm, with three faces against rotation in the chuck Total length(incl. shank): 98mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: 1100 to 260 rpm Cutting conditions - stainless steel: 550 to 120 rpm Smaller diameters can be drilled at at higher speeds, with increasing drilling diameter, the cutting speed and speed need to be reduced. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.

Four-edged cobalt step drill for thick sheets - up to 10mm Suitable for metal, steel, stainless steel, acrylic glass and non-ferrous metals, sheets and beams Range: 6-12mm Diameters: 6 - 7 - 8 - 9 - 10 - 11 - 12 mm(no need to pre-drill or punch) Number of blades: 4 Shank diameter: 8mm, with three faces against rotation in the chuck Total length(vč. stopwatch): 105mm Max. drilled material thickness: 10mm Special geometry of 4 cutting edges reduces working time by up to 75%. Thanks to the tip, there is no need to punch or pre-drill the sheet. An excellent helper for hard-to-reach places, eg for drilling into T-beams. Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TITAN-TEC, increases the life of the drill when drilling with very limited cooling(spray, paste), as well as when dry cutting. We recommend using cutting oil. Smaller diameters can be drilled at higher speeds, with increasing drilling diameter it is necessary to reduce the cutting speed and speed. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. Thanks to the spiral groove, the drilling is smooth, the chips do not stick, low cutting forces, the drilled material has fewer burrs and the tool has a longer endurance. Suitable for sheets with a thickness> 2mm.

Double-edged cobalt step drill specially designed for drilling railings Suitable for metal, steel, stainless steel, acrylic glass and non-ferrous metals, sheets and beams Range: 6-18mm Diameters: 6 - 8 - 10 - 12 - 14 - 16 - 18 mm Number of blades: 2 Shank diameter: 10mm, with three anti-rotation faces in the chuck Overall length(vč. stopwatch): 67mm Max. thickness of drilled material: 4mm / 6mm Step 12 mm - for mounting beams and spacers(extended drilling step - 6mm minimizes the risk of accidental enlargement of the hole) Step 18 mm - for railing beams and housing profiles(extended drilling step - 6mm for double drilling / 2 railings in 1 working step) The stop at the end of the drill prevents the drill from falling inside the profile during drilling - it protects both the drill and the hands. Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TITAN-TEC, increases the life of the drill when drilling with very limited cooling(spray, paste), as well as when dry cutting. We recommend using cutting oil. Smaller diameters can be drilled at higher speeds, with increasing drilling diameter it is necessary to reduce the cutting speed and speed. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. Thanks to the spiral groove, the drilling is smooth, the chips do not stick, low cutting forces, the drilled material has fewer burrs and the tool has a longer endurance. Suitable for galvanized materials, optimal cutting behavior due to constant cutting angles. There is no tilting of the drill during cutting - no work injuries

Whitworth Thread - BSW (British Standar Whitworth) Outer Diameter: 55mm < br> Standard: PN 8/3211 Corresponds to standard: ČSN 223211 / CSN 22 3211 Material: NO - Tool steel

Whitworth Thread - BSW (British Standar Whitworth) Outer Mesh Diameter : 65mm normservis.com DIN standards available in electronic (PDF) and paper formats STN 223211 / CSN 22 3211: NO - Tool steel

Whitworth Thread - BSW (British Standar Whitworth) Outer OD: 38mm CSN 223211 /

Whitworth Thread - BSW (British Standar Whitworth) Outer Diameter of Eyelet: 90mm CSN 223211 /

Whitworth Thread - BSW (British Standar Whitworth) Outer Mesh Diameter: 20mm normservis.com DIN standards now available in electronic format (PDF) ČSN 223211 / CSN 22 3211 - Material: NO - Tool steel

Whitworth Thread - BSW (British Standar Whitworth) Outer Mesh Diameter: 16mm normservis.com DIN standards now available in electronic format (PDF) STN 223211 / CSN 22 3211 - Material: NO - Tool steel

Whitworth Thread - BSW (British Standar Whitworth) Outer Mesh Diameter: 45mm CSN 223211 /

Whitworth Thread - BSW (British Standar Whitworth) Outer Diameter of Eyelet: 25mm normservis.com DIN standards available in electronic (PDF) and paper formats STN 223211 / CSN 22 3211 Material: NO - Tool steel