Metalworking tools

Carbide-tipped centering drill for diamond crowns Drill diameter: 6.35mm Drill length: 80mm Main photo is illustrative - see second photo , where this drill is realistically depicted in the holder.

Carbide-tipped centering drill for diamond crowns Drill diameter: 6.35mm Drill length: 70mm Main photo is illustrative - see second photo , where this drill is realistically depicted in the holder.

Adapter Weldon. Outer dimension 32mm, inner dimension 19mm

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 4-12mm Diameters: 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 mm Number of edges: 3 Shank diameter: 6 mm, with three faces against rotation in the chuck Total length(incl. shank): 65mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: 1600 to 550 rpm Cutting conditions - stainless steel: 800 to 230 rpm Smaller diameters can be drilled at at higher speeds, with increasing drilling diameter, the cutting speed and speed need to be reduced. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. Thanks to the spiral groove, the drilling is smooth, the chips do not stick, low cutting forces, the drilled material has fewer burrs and the tool has a longer endurance.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 4-20mm Diameters: 4 - 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 mm Number of cutting edges: 3 Shank diameter: 6 mm, with three surfaces against rotation in the chuck Total length(incl. shank): 75mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: 1600 to 320 rpm Cutting conditions - stainless steel: 800 to 160 rpm Smaller diameters can be drilled at at higher speeds, with increasing drilling diameter, the cutting speed and speed need to be reduced. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. Thanks to the spiral groove, the drilling is smooth, the chips do not stick, low cutting forces, the drilled material has fewer burrs and the tool has a longer endurance.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 6-30mm Diameters: 6 - 8 - 10 - 12 - 14 - 16 - 18 - 20 - 22 - 24 - 26 - 28 - 30 -(32needing diameter) mm Number of cutting edges: 3 Shank diameter: 10mm, with three faces against rotation in the chuck Total length(incl. shank): 100mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: 1100 to 260 rpm Cutting conditions - stainless steel: 550 to 120 rpm Smaller diameters can be drilled at at higher speeds, with increasing drilling diameter, the cutting speed and speed need to be reduced. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. Thanks to the spiral groove, the drilling is smooth, the chips do not stick, low cutting forces, the drilled material has fewer burrs and the tool has a longer endurance.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 12-20mm Diameters: 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 mm Number of edges: 2 Shank diameter: 9 mm, with three faces against rotation in the chuck Total length(incl. shank): 75mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: Cutting conditions - stainless steel: Smaller diameters can be drilled at higher speeds, with increasing drilling diameter cutting speed is required and reduce the speed. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 20-30mm Diameters: 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 mm Number of cutting edges: 2 Shank diameter: 12 mm, with three faces against rotation in the chuck Total length(incl. shank): 88mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: Cutting conditions - stainless steel: Smaller diameters can be drilled at higher speeds, with increasing drilling diameter cutting speed is required and reduce the speed. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 30-40mm Diameters: 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 mm Number of cutting edges: 2 Shank diameter: 13 mm, with three faces against rotation in the chuck Total length(incl. shank): 97mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: Cutting conditions - stainless steel: Smaller diameters can be drilled at higher speeds, with increasing drilling diameter cutting speed is required and reduce the speed. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 40-50mm Diameters: 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 mm Number of edges: 2 Shank diameter: 13mm, with three faces against rotation in the chuck Total length(incl. shank): 112mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: Cutting conditions - stainless steel: Smaller diameters can be drilled at higher speeds, with increasing drilling diameter cutting speed is required and reduce the speed. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 50-60mm Diameters: 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 mm Number of edges: 2 Shank diameter: 13 mm, with three faces against rotation in the chuck Total length(incl. shank): 120mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: Cutting conditions - stainless steel: Smaller diameters can be drilled at higher speeds, with increasing drilling diameter cutting speed is required and reduce the speed. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.

Cobalt step drill for metal, steel, stainless steel, acrylic glass and non-ferrous metals Range: 4-12mm Diameters: 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 mm Number of edges: 2 Shank diameter: 6 mm, with three faces against rotation in the chuck Total length(incl. shank): 65mm Max. thickness of drilled material: 4mm Material: HSS-XE - high-alloy cobalt high-speed HSSE steel(68 HRC) Coating: TiN-GOLD(basic coating), increases the life of the drill when drilling with very limited cooling(spray , paste), also for dry cutting Cutting conditions - steel: 1600 to 550 rpm Cutting conditions - stainless steel: 800 to 230 rpm Smaller diameters can be drilled at at higher speeds, with increasing drilling diameter, the cutting speed and speed need to be reduced. Failure to maintain the speed or overheating the drill may cause it to become dull. Transitions to a larger diameter also perfectly needle the drilled hole. The straight groove drill is ideal for drilling in hand and cordless drills. Also suitable for thin sheets. Holes up to a diameter of 40 mm can be drilled in the hand in this way.