Metalworking tools

Right-cut ground carbide extended NC drill with cylindrical shank Drilling diameter: according to the selected variant Total length: 120mm Blade angle: according to the selected variant Helix angle: 30° Material: Carbide - carbide / carbide K20 / K30, DIN6535 No coating Usage : Special drill for positionally accurate and fast drilling on NC / CNC machines, coordinate boring machines, etc. For centering and chamfering the edge of a thread hole in one operation If you need a different diameter, length or angle, ask us, we will be happy to offer.

Carbide drill TK / HA / PVD Diameter: according to the selected variant Length: 12D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Right-handed ground short spiral NC drill for steel with cylindrical shank Edge angle: 90 ° Helix angle: 25-30 ° Material: HSSCo5 (High speed steel HSSE, ie HSS + 5% Co) Standard: ČSN 221185 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. The drill is used on NC machines for drilling holes in materials such as steel, stainless steel, composites, inconel, brass, titanium, aluminum alloys, plastics or wood. It can also be used for chamfering and deburring.

Right-handed ground short spiral NC drill for steel with cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 120 ° Helix angle: 25-30 ° Material: HSS - High speed steel Standard: DIN 1897 / DIN1897 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Right-handed ground short spiral NC drill for steel with cylindrical shank Drill length: Short series - lengths see attached photo Edge angle: 120 ° Helix angle: 25-30 ° Material: HSSCo5 (High speed steel HSSE, ie HSS + 5% Co) Standard: DIN 1897 / DIN1897 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. For centering and chamfering a threaded hole in a single operation

Three-edged taper countersink with long clamping shank Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSSE / HSSCo5 - High speed steel + 5% Co5 Standard: DIN 335 C XL

Crown drill / puncher / drill bit bi-metal, jigsaw Average: according to the selected variant Max. drilling depth: 38mm Catalog number: 20.1500 Cutting conditions - see attached catalog sheet Material: HSS Co8 (high speed steel with 8% cobalt) Fine tooth - toothing 4/6 " Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals * From a diameter of 160 mm, drilling into metal is not recommended - only non-metallic materials, wood, plastic, etc. HSS Co8 bimetal jigsaw. Fine gearing is very well suited for metals. It ensures a quieter operation and requires less effort. Due to less heat generation during cutting, the service life is extended, especially for metals. Suitable for alloy and common steels (up to 750N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.

Short drill with cylindrical shank, material HSS Standard: PN 2905 / DIN1897RNHSS Form C - ground conical surface with shortening of the transverse edge - type C PROFI - tools produced by grinding and precision milling Powerful drills recommended for common drilling on automatic and turret lathes in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray, malleable and ductile cast iron, sintered steel, short-chip aluminum alloys, bronze, tough brass . Especially suitable for drilling thin-walled materials.

Short drill with cylindrical shank, material HSS Co5 Standard: PN 2905 T1000 / DIN 1897 GT100 Form C - ground conical surface with shortening of the transverse edge - type C PROFI - tools produced by grinding and precision milling High-performance drills with increased heat resistance with a special groove profile recommended for drilling in alloy steel parts, steel castings with strength above 1000 N / mm2, especially steels for volume hot and cold forming, rolls of rolling mills, steels for cementing and tempering, stainless steel.

Right-handed ground twist drill with slow helix, for hard brittle materials with brittle chips Drill length: Classic short series - lengths see enclosed catalog sheet Edge angle: 118 ° Helix angle: 10 ° - 15 ° Material: HSS - High speed steel Standard: PN2911, DIN338 RH Usage: General - hand, stand, column drills Non-ferrous metals - aluminum, copper, bronze, brass, plastics, resins and horn, eternit, slate, mica, hard rubber, etc. materials with friable chips

Crown drill / puncher / drill bit bi-metal Average: according to the selected variant Max. drilling depth: 38mm Cutting conditions - see the enclosed catalog sheet Suitable for drilling in: non-alloy steel, non-ferrous and light metals, plastics, plasterboard, reinforced boards, plywood and woodworking HSS bimetallic jigsaws with variable gearing. For easy-to-machine materials, the variable toothing ensures a more even tool passage and requires less effort. Thanks to lower vibrations and heat generation during cutting, up to three times longer service life is achieved. Suitable for non-alloy steels up to 700N / mm2, non-ferrous and light metals, plastics, plasterboard boards, reinforced boards, plywood and for working with wood.

Cobalt core drill / jig / drill bit bi-metal Average: according to the selected variant Max. drilling depth: 38mm Cutting conditions - see the enclosed catalog sheet Material: HSS Co8 (high speed steel with 8% cobalt) Fine tooth Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co 8 bimetal jigsaw. Fine gearing is very well suited for metals. It ensures a quieter operation and requires less effort. Due to less heat generation during cutting, the service life is extended, especially for metals. Suitable for alloy and common steels (up to 1100N / mm2), high chromium steels such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.