Metalworking tools

HD-810, . The oil is then drained from the unit through the outlet - a rubber hose. Economic solution in the consumption of cutting fluid - oils. Low weight, easy handling. Special Leather Belt with Long Life, Heat and Chemical Resistant Parameters: Belt Width: 39mm Tape Length (Total): 550mm Band length (functional part): 2x90mm Diameter hose: 22mm Hose length: 600mm Maximum filtration: 4litres per hour Dimensions (WxHxD): 102x138x150 (see enclosed photo) Power supply: 220V Application: For economical removal of free oil from machine parts or tools. Ref. No .: 2020-101

Belt width: 39mm Tape length (total): 550mm

After removing the rubber cord into an oil pan (or a liquid bath) - rubber hose. This separator has a 24-hour timer that allows repeated automatic start-up as needed. Economic solution in the consumption of cutting fluid - oils. Low weight, easy handling. Parameters: Hose diameter: 22mm Length of hose: 150mm < - oil from containers and oil vats. Ref. No .: 2020-102

Spare Dumbbell Strand / Rope Long Durable Rubber Strap, Heat and Chemical Resistant Diameter: 4,5mm Length (total): 900mm

HD-830 Oil Separator / Rubber Rope Filter Unit - Oil, Type HD-830 After immersing the rubber rope in an oil pan (or liquid bath) hose. Economic solution in the consumption of cutting fluid - oils. Low weight, easy handling. Parameters: Hose diameter: 22mm Length of hose: 150mm < - < oil from containers and oil vats. Ref. No .: 2020-103

Granite Counter Board Included Stand Accuracy 0,005 / 100mm Board Size: 150x150mm Board Height: 52mm Overall Length (with Stand): 232mm Clamping Eye in Stand has a diameter of 8mm (you will see the commonly available gauges) Weight: 4.4kg

Holder, mandrel for clamping diamond drill bits Clamping range: 14-30mm Clamping shank: hexagon 9.5mm (do not use a hammer!) Drill diameter: 6, 35mm Thread: UNF 1/2" x 20 steps per inch The holder includes a drill with brazed carbide tips.

Holder, mandrel for clamping diamond drill bits Clamping range: 32-152mm Clamping shank: hexagon 9.5mm (do not use hammer!) Drill diameter: 6, 35mm Thread: UNF 5/8" x 18 pitches per inch The holder includes a 6.35x80mm drill with brazed carbide tips.

Holder, mandrel for clamping diamond drill bits Clamping range: 32-152mm Clamping shank: hexagon 11mm (do not use a hammer!) Drill diameter: 6.35mm Thread: UNF 5/8" x 18 pitches per inch The holder includes a 6.35x80mm drill bit with brazed carbide tips.

Holder, mandrel for clamping diamond drill bits Clamping range: 32-152mm Clamping shank: hexagon 11mm (do not use a hammer!) Drill diameter: 6.35mm Thread: UNF 5/8" x 18 pitches per inch The holder includes a 6.35x80mm drill bit with brazed carbide tips.

Holder, mandrel for clamping diamond drill bits Clamping range: 14-30mm Clamping shank: SDS (do not use a hammer!) Drill diameter: 6.35mm Thread: UNF 1/2" x 20 pitches per inch The holder includes a drill bit with brazed carbide tips.

Holder, mandrel for clamping diamond drill bits Clamping range: 32-152mm Clamping shank: SDS (do not use hammer!) Drill diameter: 6.35mm Thread: UNF 5/8" x 18 pitches per inch The holder includes a 6.35x80mm drill bit with brazed carbide tips.