Metalworking tools

Hand set tap G 3/8 "for pipe thread Pitch: 19 walking per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Machine tap M 2 straight groove Gradient: 0.4, basic Face: ISO2 - Cut thread profile Standard: DIN 371 (reinforced stopper) Material: HSSE ( High-speed steel 5% Cobalt)

TK / HA / PVD hard metal drill bit Diameter: 2,0mm Length: 3D Helix length: 12mm Overall length: 38mm d1 = d2 Helix Angle: 30 - 35 ° Angle of Tip: 118 ° TiAlN (Titan Aluminum Nitride) Carbide: Fine K20 / K30 Standard: DIN6539 / DIN1897 Application: Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, a carbide drill, which was manufactured based on standard HSS drills. I.e. these drills have the same length, helix and tip angle as standard HSS drill bits. We are able to supply these drills with non-coated or other coating (TiN) - see photo

TK / HA / PVD hard metal drill bit Diameter: 2,6mm Length: 3D Helix length: 14mm Overall length: 43mm d1 = d2 Helix Angle: 30 - 35 ° Angle of Tip: 118 ° TiAlN (Titan Aluminum Nitride) Carbide: Fine K20 / K30 Standard: DIN6539 / DIN1897 Application: Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, a carbide drill, which was manufactured based on standard HSS drills. I.e. these drills have the same length, helix and tip angle as standard HSS drill bits. We are able to supply these drills with non-coated or other coating (TiN) - see photo

TK / HA / PVD hard metal drill bit Diameter: 7,8mm Length: 3D Helix length: 37mm Overall length: 79mm d1 = d2 Helix Angle: 30 - 35 ° Angle of Tip: 118 ° TiAlN (Titan Aluminum Nitride) Carbide: Fine K20 / K30 Standard: DIN6539 / DIN1897 Application: Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, a carbide drill, which was manufactured based on standard HSS drills. I.e. these drills have the same length, helix and tip angle as standard HSS drill bits. We are able to supply these drills with non-coated or other coating (TiN) - see photo

M3-M12 M3, M4, M5, M6, M8, M10, M12, CSN 223043 (straight groove with chip breaker) Taps: M3, M4, M5, M6, M8, M10, M12, PN 8/3044 (spiral groove) Taps for DIN 1814 Taps Material: HSSE - high-speed steel (HSS Co5)

Stainless Steel Fixed Threaded Insert for Socket Thread Socket Thread Insert: M 14x1,25 mm Insertion Housing: 17,5mm Inner Thread Insert: M16x1,25

Two-part centering pin for core drill - usable for core drills of the series: HARD-LINE 150(for diameters 55-60mm) Cat. no.: 20.1124

Centering Pin for Core Drilling - Usable for Core Drills pr. 12 to 17mm series: HARD-LINE 40 Cat. No .: 38720.1149

Centering Pin for Core Drilling - Usable for Core Drills pr. 18 to 65mm series: HARD-LINE 40 Cat. No .: 38720.1151

Two-piece centering pin for core drill - usable for core drills of the series: HARD-LINE 150(for diameters 20-54mm) Cat. no.: 20.1152

Retractable holder, mandrel for clamping bimetallic crowns 20.1169 Clamping range: 32-305mm(idally 100-305mm) Clamping shank: hexagon 9.5mm(3/8 ") With this holder, you will not have a problem pulling the drilled material from the center of the crown. Drill diameter: 6.35mm Thread: UNF 5/8 "x 18 strokes per inch The holder includes an HSS drill.