Metalworking tools

Insert for internal knife - for trapezoidal thread Knife / insert for cutting internal trapezoidal threads 16U IR/L 5 TR Inserts for cutting trapezoidal threads with a pitch of 5 mm Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See cutting conditions attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchange insert 16 V ER 11.5 NPT BMA / 16 V IL 11.5 NPT BMA Size: 16 Pitch: 11.5 walking per inch(The advantage of this plate is the possibility of cutting to the "end" thanks to the raised tip to the side ›) With this plate you solve NPT 1" to NPT 2 "threads Plate height: 3,6mm The plate is inserted !To the vertical holders - the cutting edge is visible in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchangeable cutting insert 16 V ER 14 NPT BMA / 16 V IL 14 NPT BMA Size : 16 Climb: 14 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) With this insert you can cut NPT 1/2 ", NPT 5/8", NPT 3/4 ", NPT 7/8" threads Insert height: 3.6mm The plate is inserted into the vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchange insert 16 V ER 18 NPT BMA / 16 V IL 18 NPT BMA Size : 16 Climb: 18 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) With this plate you cut NPT 1/4 "and NPT 3/8" threads Plate height: 3.6mm The plate is inserted into vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchange insert 16 V ER 27 NPT BMA / 16 V IL 27 NPT BMA Size : 16 Climb: 27 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) With this plate you can cut NPT 1/16 "and NPT 1/8" threads Plate height: 3.6mm The plate is inserted into vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchangeable cutting insert 16 V ER A55 BMA / 16 V IL A55 BMA Size: 16 Climb: 48 - 16 walks per inch(The advantage of this board is the possibility of cutting to the "end" thanks to the raised tip to the side) Insert height: 3.6mm The insert is inserted into the vertical holders - the cutting edge is visible on the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external exchangeable cutting insert 16 V ER A60 BMA / 16 V IL A60 BMA Size: 16 Climb: 0.5 - 1.5(The advantage of this plate is the possibility of cutting until the "end" thanks to the raised tip to the side) Insert height: 3.6mm The insert is inserted into vertical holders - the cutting edge can be seen on the second photo. Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for ordinary High to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 stainless steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see enclosed catalog, page no. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Vertical external replaceable edge thread insert 16 V ER AG60 BMA / 16 V IL AG60 BMA Size: 16 Pitch: 0.5 - 3.0( the advantage of this insert is the possibility of cutting "to the end" thanks to the offset tip to the side) Apical angle: 60° Insert height: 3.6 mm The insert is inserted into vertical holders - the cutting edge can be seen in the second photo. Coating: PVD TiALN Wave material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage : Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel Cutting conditions see attached catalogue, page no. 56(sheet no. 60). The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Hand tap G 1/16 "for pipe thread Pitch: 28 walks per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Manual orchard tap G 1/4 "for pipe thread Pitch: 19 walking per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Hand tap G 1/8 "for pipe thread Climb: 28 walks per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals

Hand tap G 3/4 "for pipe thread Pitch: 14 walks per inch, basic Material: HSSE VA - cobalt high speed steel - stainless steel Coating: OX - oxidation Standard: DIN5157(replacement for ÄOSN 22 3012 / CSN 223012) Application: Structural steels up to 800MPa Free-cutting steels up to 750MPa Tool steels up to 900MPa Cast steel 500-700 MPa Tempered cast iron 450-700 MPa Stainless and heat-resistant steels up to 1100MPa Cast steel 700-900Mpa Bronze, brass, zinc, copper and other lightweight metals