Metalworking tools

Interchangeable insert TN 16IL10W Size : 16 Number of strokes per inch : 10 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replacement threaded insert 16 IL 115 NPT BMA Size: 16 Goes per inch: 11,5 More !Ka(po run = 29: 3,47mm Suitable for cutting an internal American inch conical pipe thread NPT S use this plate to cut threads NPT 1 "to NPT 2" Coating: PVD TiALN Sheet material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page Ä. 56(list Ä. 60). The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replacement threaded insert TN 16IL11W Size: 16 Walks per inch: 11 Height(after running) â „c it): 3,47mm Suitable for cutting the inner inch pipe thread G Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds < br> Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co, Fe, Ti) Hardening Â!Steel For cutting conditions, see the enclosed catalog, page no. 56(letter No. 60). Contact the Company: Cat. A „. : The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IL12W Size : 16 Number of strokes per inch : 12 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Internal replacement threaded insert TN 16IL14W Size: 16 Walks per inch: 14 Height(a % It): 3,47mm Suitable for cutting the inner inch pipe thread G Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for common to high cutting speeds Application: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Heat-resistant steel(Ni, Co, Fe, Ti) Hardened steel For cutting conditions, see the enclosed catalog, page no. 56(list Ä. 60). Contact the Company: Kat. Ä. : The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IL16W Size : 16 Number of strokes per inch : 16 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IL18W Size : 16 Number of strokes per inch : 18 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IL19W Size : 16 Number of strokes per inch : 19 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting internal inch pipe thread G Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel For cutting conditions, see attached catalogue, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IL20W Size : 16 Number of strokes per inch : 20 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert insert TN 16IL22W Size : 16 Number of strokes per inch : 22 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IL24W Size : 16 Number of strokes per inch : 24 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Interchangeable insert TN 16IL26W Size : 16 Number of strokes per inch : 26 Peak angle : 55° Height (to edge) : 3.47mm Suitable for cutting an internal inch whitworth thread Coating: PVD TiALN Blade material: BMA - universal use, suitable for classic and stainless steel, non-traditional materials, for normal to high cutting speeds Usage: Steel: P20-P40 Stainless steel Cast iron: K20-K30 Refractory steel (Ni,Co,Fe,Ti) Hardened steel See attached catalog for cutting conditions, page no. 56(sheet no. 60). Cat. no.: The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.