Metalworking tools

Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 8D Helix angle: 30 - 35 ° Tip angle: 135 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Catalog number: S20122

Conical drill mandrel for drill chuck (mandrel for chuck) Spindle taper: according to the selected variant Cone for the header: according to the selected variant Standard: DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Usage: milling machine - with manual tool change

Machine tap (high speed) with a drill in one Tolerance: ISO2 / 6H Material: HSSE - High speed steel + 5% Co5 = HSSCo5 Max. thread depth: 2xD Usage: Non-alloy and alloy steels with strength up to 800N / mm2 Copper, brass, aluminum alloys, zinc alloys Suitable for speed-switching machines for drilling and threading. Not suitable for tapping adapters.

Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: steep ISO cone - size according to the selected variant Tightening / loosening: with an Allen key The key is part of the package. Standard: DIN2080 - manual tool change Accuracy / throw - see the description of the selected variant Application: classic milling machines with manual tool change

Self-locking chuck, precision quick-release head, type SOLID Clamping range: according to the selected variant Clamping cone: steep ISO cone - size according to the selected variant Tightening / loosening: hook wrench with tooth The key does not have to be part of the package - see photo or description of the selected variant Standard: DIN69871 - automatic tool change Accuracy / throw - see the description of the selected variant Application: milling machines and CNC with exchanger type DIN69871

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter suitable for finishing and roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 39/41 ° - variable helix Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Thanks to the variable helix, the cutter has excellent anti-vibration properties for side milling, where it is possible to use the entire length of the helix. The cutter runs smoothly. The cutter has 2 cutting edges across the center, a reinforced core. Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide ( TK ) milling cutter for universal milling, long - made of cemented carbide Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 40° / 42° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S151602

Carbide (TK) milling cutter for universal milling, long - from cemented carbide, with weldon surface Number of blades: 4 blades. Diameter of the working part: according to the selected variant, tolerance h10 Length of the working part: according to the selected variant Helix angle: 40° / 42° Head angle: 12° Bevel of the tooth on the forehead: 45°, s=0.1 - 0.5mm Other dimensions - see the attached catalog sheet Standard: DIN6527L, DIN 6535 HA Carbide: K30 F - ultra-fine-grained carbide, high hardness and resistance to abrasion, with increased tensile strength for superior stability. Always cool with a suitable liquid - according to the material. Coating: PVD ( AlCrN ) Usage : Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Refractory steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo Order no. No. - series: S151612

Tvrdokovový 3bř. countersink Maximum diameter: according to the selected variant Minimum diameter: see product description for selected variant Clamping shank: see product description for the selected variant, with three anti-rotation surfaces Edge angle: 90st. Overall length: see product description for selected variant Coating: BLUE-TEC, increases the life of the countersink when cutting with very limited cooling (spray, paste), as well as when cutting dry Material: carbide (diameter 4.3 to 11.5 all-carbide design, 12.4-31 mm carbide head with brazed shank made of tool steel) Standard: DIN335 C Usage: Hardened steel up to 50 HRC Alloy steel with tensile strength up to 1400N / mm2 Stainless steel with tensile strength up to 900N / mm2 Gray cast iron Aluminum alloys with silicon content> 10% Copper, brass, plastics Hardox, Hastelloy, Inconell, Nimonic and other special alloys Features: Excellent chip evacuation, cutting edge, resulting surface without scratches, excellent tool-hole centering The countersink grooves are ground with a fine diamond wheel, which makes the cutting edge sharper and smoother compared to conventional countersinks where the grooves are milled. The cutting edge is always the highest point of the diameter, ie during countersinking the material does not rub against the wall of the countersink, which reduces the required cutting force and also reduces the heat generated -> which increases the service life of the countersink.

Carbide conical countersink for Hardox Maximum diameter: according to the selected variant Blade angle: 90°. Number of blades: 5 (with a diameter of 10.4 mm there are 4 blades) Other dimensions - see the attached catalog sheet Coating: BLUE-TEC, increases the life of the countersink when cutting with very limited cooling (spray, paste), as well as when cutting dry Material: carbide (diameter 10.4 all carbide design, 12.4-31mm carbide head with brazed tool steel shank) Usage : Hardox 400, Hardox 450, Hardox 500 Hardened steel up to 60 HRC Alloyed steel with tensile strength up to 1400N/mm2 Stainless steel with tensile strength up to 900N/mm2 Gray cast iron Graphite, carbon and plexiglass, reinforced plastics Hastelloy, Inconell, Nimonic and other special alloys with strength above 850 N/mm2 Warning - carbide / carbide countersinks should only be used on NC/CNC machines. Properties : Excellent chip evacuation, the edge does not chip, the resulting surface is scratch-free, excellent tool-hole centering The countersink grooves are ground with a fine diamond wheel, making the edge sharper and smoother compared to conventional countersinks where the grooves are milled. The cutting edge is always the highest point of the diameter, i.e. when countersinking, the material does not rub against the wall of the countersink, which reduces the necessary cutting force and also reduces the generated heat -> which increases the service life of the countersink. Cat. no. : 403045 / 40 3045

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 8D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K40UF Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC