Metalworking tools

Threaded eye with jaws / threaded eye with jaws Thread type: BA - British Association - model thread Thread apex angle: 47.5 °, rounded top and bottom of the thread Standard: BS1127, BS93 Material: HSS - High speed steel

Rectangular knife radeco Size: according to the chosen variant Length: according to the chosen variant Material: HSS / HSSCo5 / HSSCo10 - according to the selected variant Standard: ČSN 223691/223691 / DIN4964D / DIN 4964 D Radeco can be used for the production of turning knives, precision washers and other tools

Round semi-finished knife radeco / round radeko Average: according to the selected variant Length: according to the chosen variant Material: HSS / HSSCo5 / HSSCo10 - according to the selected variant Standard: ČSN 223692/223692 / DIN4964A / DIN 4964 A Radeco can be used for the production of turning knives, you can grind it as needed.

Parting semi-finished product radeco Width (parting): according to the selected variant Clamping height: according to the selected variant Length: according to the chosen variant Material: HSS / HSSCo5 / HSSCo10 - according to the selected variant Standard: ČSN 223693/223693 / DIN4964E / DIN 4964 E

Sharpened parting radeco, ready for immediate use Width (parting): according to the selected variant Clamping height: according to the selected variant Length: according to the chosen variant Material: HSSCo5 / HSSCo10 - according to the selected variant Standard: ČSN 223693/223693 / DIN4964E / DIN 4964 E

Radeco parting blank, irregular trapezoid Width (parting): according to the selected variant Clamping height: according to the selected variant Length: according to the chosen variant Material: HSS Standard: ČSN 223694 / CSN 223694

Coated cobalt three-edged taper countersink with Morse taper Maximum diameter: according to the selected variant Blade angle: 90st. Other dimensions: see enclosed catalog sheet Material: HSS-XE - high-alloy cobalt high-speed HSSE steel (68 HRC) Coating: BLUE-TEC, increases the life of the countersink even when cutting with very limited cooling Standard: DIN335 D, resp. ČSN 221626 Usage: Steels with strength

Rod preventing the movement of the lubrication ring For Karnasch lubrication rings in the range: according to the selected variant Other measures - see the attached catalog sheet Suitable for Karnasch grease rings - see related products Cat. no.: 2290020

Machine tap( quick cut) M 5, straight groove Pitch: 0,8, basic Fitting: ISO2 / 6H - grinding Thread profile Standard: DIN 371 Thread start: C, 2-3 turns - see attached photo Material: HSSE( Speed cutting steel 5% Cobalt) Thread grinding profile Application: 1.2: Non-alloy cast steel 2.2: Construction and stainless steel 8.1: Aluminum alloyed with Si content 10% 10.1: Copper alloys with short brittle chips

Collet chuck SK ISO 40 ER 40 - 80 mm ISO40xER40(40xER40) Length from cone to chuck: 80mm Max. collet size: 30mm Thread for pull-in screw / bolt: M16 For collets with outer diameter: 40mm Diameter r clamping nut: 62mm ER40 collets can be purchased separately. Throw: up to 0,005mm Standard: DIN 2080, DIN 6499 Collet clamping procedure: Snap the collet into the clamp nut - according to the attached picture.

Hexagon nut with collar Thread: M20 Hexagon Hardness: 34HRC Standard: no norm, resp. in replacement for ČSN 243530.2 or DIN 6331 Production technology: Pressing Total Nut Nut: 26mm Hexagon: 32mm

Milling pads (milling pad), vice pads, milling pads The set contains 18 pairs: Dimensions of washers: 5x16x100 / 6x18x100 / 8x24x100 / 10x30x100 / 12x36x150 / 14x48x150 / 18x60x150 / 22x62x150 Clamp size: 15x31x2,5x200 Accuracy: 0.01mm Flatness of functional surfaces: 0.005mm (see attached picture) Hardness: 48-53 HRC Ord. No .: 1004-001