Metalworking tools

Turning insert VBD WNMG 080404 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.40 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 080408 - AL H01 Radius: 0,8mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.40 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DCMT 070204 - MF MP20 Radius: 0,4mm Coating: TiAlN, PVD MP20 series: Substrate on a super micrograin basis, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 100 -210 m / min fn = 0.06-0.17 mm / rev. ap = 0,2-2,3 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD DCMT 11T304 - MF MP20 Radius: 0,4mm Up. hole - diameter: 4,4mm Coating: TiAlN, PVD Series MP20: Substrate for super micrograins m base, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 150 -270 m / min fn = 0.08-0.23 mm / rev. ap = 0,3-3,0 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD KNUX 160405 - 11, PK25 Radius: 0,5mm Coating: MT-TiCN, Al2O3 TiN < br> Series PK25: Excellent wear resistance and rigidity. Ideal for conventional machining / roughing of conventional steels and steel alloys. Application: Steel: P15-P30 Cast iron:(K10-K20) Cutting conditions: Vc = 120-220 m / min fn = 0.20-0.35 mm / rev. ap = 1,0-6,0 mm Type 11: Roughing breaker for machining common steels, stainless steels and cast steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD KNUX 160405 - 11, MP30 Radius: 0,5mm Coating: PVD, TiCN TiN MP30 Series: High wear resistance, suitable for intermittent cutting, ideal for stainless steel. Application: Steel:(P20-P40) Stainless steel: M15-M35 Cutting conditions: Vc = 80-160 m / min fn = 0.20-0.35 mm / rev. ap = 1,0-6,0 mm Type 11: Roughing breaker for machining common steels, stainless steels and cast steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 060204 - MF MP20 Radius: 0,4mm Coating: TiAlN, PVD MP20 series: Substrate on a super micrograin base, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 100 - 210 m / min fn = 0.06-0.17 mm / rev. ap = 0,2-2,4 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 09T304 - MF MP20 Radius: 0,4mm Coating: TiAlN, PVD MP20 series: Substrate on a super micrograin basis, high rigidity, very low adhesion of machined material. Ideal for machining stainless and conventional steels. Application: Steel: P15-P25 Stainless steel: M15-M25 Cast iron: K05-K10 Cutting conditions: Vc = 150 -270 m / min fn = 0.08-0.23 mm / rev. ap = 0,3-3,0 mm Type MF: Special breaker with a sharp beige item preventing the chips from sticking. Suitable for normal machining and finishing - classic steel and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning knife for high-speed steel internal threads Clamping square: according to the selected variant Other dimensions - see product description for each variant Material: HSS - high speed steel Standard: ČSN 223316 / CSN 22 3316 / DIN4453R

Brass brush, 4 rows Corrugated wire strength: according to the selected variant Total width: 34mm Total length: 280mm Wooden handle

Drilling insert VBD SPMT 050204 - DG PKM30 Radius: 0,4mm Coating: TiCN TiN, PVD PKM30 series: Universal plate, high temperature and dimensional stability - solid micro-grained substrate. High resistance to abrasion and breakage. Application: Steel: P20-P40 Stainless steel 28: M20-M40 Cast iron: K15-K30 Hardened steel: H05-H15 < br> Cutting conditions - see attached table. Type DG: Universal breaker for drilling classic steels, cast iron and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Drilling insert VBD SPMT 060204 - DG PKM30 Radius: 0,4mm Coating: TiCN TiN, PVD PKM30 series: Universal plate, high temperature and dimensional stability - solid micro-grained substrate. High resistance to abrasion and breakage. Application: Steel: P20-P40 Stainless steel 28: M20-M40 Cast iron: K15-K30 Hardened steel: H05-H15 < br> Cutting conditions - see attached table. Type DG: Universal breaker for drilling classic steels, cast iron and stainless steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.