Metalworking tools

High-speed steel turning knife Clamping square: according to the selected variant Other dimensions - see product description for each variant Material: HSS - high speed steel Standard: ČSN 223540 / CSN 22 3540

External thread turning lathe with soldered blade Knives come from older stocks, the blades are undamaged, the varnish does not have to be 100%. Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223770 / CSN 22 3770, DIN282 - 60 R, ISO13 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

External thread turning lathe with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Top angle: 60 ° Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223770 / CSN 22 3770, DIN282 - 60 R, ISO13 R Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.

Taper reamer 1:10, straight teeth with even pitch Size: according to the chosen variant Other dimensions - see enclosed catalog sheet Shank: cylindrical with square Material: HSS - High speed steel Standard: ČSN 221460 / CSN 221460 Usage: For manual and machine reaming of cavities for tapered shaft ends 1:10

Taper reamer 1:50 , teeth in left helix 7 ° Size: according to the chosen variant Form: B Shank: cylindrical with square Material: HSS - High speed steel Standard: ČSN 221469B / CSN 22 1469 B / DIN9B / DIN 9 B / ISO 3465 Usage: For manual and machine reaming of holes for taper pins 1:50

Quick release attachment / sleeve / insert / collet for circular jaw / threaded eye The attachment clamps round jaws with an outer diameter: according to the selected variant Insert size: according to the selected variant Other dimensions - see product description for individual variants Dimensions of inserts: TC-312: radius stones are 10mm wide, 4mm high and wall thickness is 3mm. Outer / inner diameter of stones: 25.4mm / 19mm. TC-820: radius stones are 11mm wide, 5mm high and wall thickness is 4mm. Outer / inner diameter of stones: 39.5mm / 31mm. This insert fits into a thread cutter - see related products. We do not recommend using it alone.

Morse insert with cylindrical shank for CNC / NC Morse inner cone: according to the selected variant Outer diameter: according to the selected variant Usage: For drills, countersinks, reamers, countersinks, etc. - with taper shank and carrier

Involute gear cutter / involute module cutter Module: according to the selected variant Angle: 20° Clamping diameter: always on request for each milling cutter - it is an aftermarket product - it may differ from the standard Material: HSS Standard: ČSN 222510 / 22 2510

Gun brush Diameter: according to the selected variant Brush length: according to the selected variant Total length: according to the selected variant Strength of the wire: according to the selected variant Material: corrugated steel They are intended for cleaning the main guns and also for cleaning the inner spaces of the tubes

Metric reduction - insert for metric taper for Czech-made lathe spindles External metric cone: according to the selected variant Internal Morse cone: according to the selected variant Through, without internal thread Other dimensions: see product description for individual variants The metric cone has a conicity of 1:20 Usage: - lathe - also a milling machine in case of emergency The bushing is punched out of the machine spindle with a rod made of a softer material. The back of the case is modified for this method. The external and internal taper does not go all the way to the end = no burrs are created.

Only suitable for Iscar lathe holders! Kat. : 7002781

Set of modular milling cutters for involute gearing / involute modular milling cutters Module: according to the selected variant Angle: 20° Clamping diameter: always on request for each set of cutters - it is an aftermarket product - it may differ from the standard Material: HSS Standard: ČSN 222510 / 22 2510 This set includes 8 cutters: from 12-13 from 14-16 from 17-20 from 21-25 from 26-34 from 36-54 from 55-134 of 135 - infinity