Metalworking tools

Real high-speed steel turning knife Clamping square: according to the selected variant Other dimensions - see product description for each variant Material: HSS - high speed steel Standard: ČSN 223550 / CSN 22 3550

Holder for shaping knife: according to the selected variant Clamping square of the holder: according to the selected variant Standard: ČSN 24 1026

Air tapping head / tap Range: according to the chosen variant Size of TC extensions: according to the selected variant Speed: see label for each variant Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). The tap is without tap adapters, available for purchase - see related products

SK carbide / carbide technical conical cutter, double sec Material: TK ( SK ) Type: Conical - type SKM Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Diameter of the clamping shank: according to the selected variant Total length of the tool: according to the selected variant Usage : Cross teeth are suitable for machining difficult-to-machine materials High-alloy steel, cast iron, stainless steel, heat-resistant steels Suitable for chamfering, needling, deburring, surface repair after welding, surface shaping

Turning parting insert, replaceable parting insert for parting GIP 2.47-0.20 IC354 Cutting width : 2.47mm Radius: 0.20mm Max. Groove depth: 5mm Clamping width: 2.4mm Coating: TiCN(Titan Carbon Nitride) IC354 series: Thin PVD TiCN coating on carbide P40. High hardness. Suitable for common use - cutting, grooving steels, alloys and stainless steels at normal to high working conditions. Application: Steel: P20-P40 Stainless steel: M10-M30 Terms and conditions - see attached photo < br> Ord. Ä. : 6402527 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

SK carbide / carbide technical cutter, simple sec Material: TK ( SK ) Type: Conical - SKM type Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Diameter of the clamping shank: according to the selected variant Total length of the tool: according to the selected variant Usage : High-alloy steel, cast iron, stainless steel, heat-resistant steels Suitable for chamfering, needling, deburring, surface repair after welding, surface shaping

SK carbide / carbide technical conical cutter, ALU sec Material: TK ( SK ) Type: Conical - SKM type Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Diameter of the clamping shank: according to the selected variant Total length of the tool: according to the selected variant Usage : Suitable for soft materials - aluminum, aluminum alloys, zinc and other non-ferrous metals, hard wood and hard rubber

Turning insert, Turntable cutting insert TGMF 304, IC908, Iscar Cutting width: 3,0mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Application: Steel: P15-P30 Stainless Steel: M20-M30 Cast Iron: K20-K40 Non Ferrous Metals & Plastics: N05-N20 S05- S20 Hardened H05-H15 Ref. : 6450083

New, unused semi-circular radius cutter hollow, push-in Radius: according to the selected variant Diameter of the cutter: according to the selected variant Width: according to the selected variant Diameter of the clamping hole: according to the selected variant Other dimensions - see product description for individual variants Material: HSS - High-speed steel Standard: ČSN 222230 / 22 2230 Resale - only a limited number of pieces

Adjustable swivel angle head For pneumatic taps: according to the selected variant Inclination: 90 °

Shaping disc knife, shaping wheel for involute gears / modular wheel with straight teeth Average: according to the selected variant Module: according to the selected variant Angle: 20 ° Other dimensions: see product description for individual variants Material: HSS Standard: ČSN 22 2570 Unused

Quick release attachment / sleeve / insert / collet TC312 / GT12 with slip for machine taps The attachment clamps taps: DIN 371 (reinforced shank): see attached table DIN 376 (classic shank): see attached table Dimensions of the clamping part (insertion into the clamp - see 2nd photo) - the radius stones are 10mm wide, 4mm high and the wall thickness is 3mm. Method of clamping the tap: The taps are secured in the extension by a square and a clamping shank. The tap is firmly held in the extension, it is pulled out after pressing the clamping collar in the front of the extension. Features : The tap is clamped in a suitable collet TC312, which has a torque coupling already preset, or it can be fine-tuned as needed. This insert fits into a thread cutter - see related products. Cannot be used alone.