Metalworking tools

Extra long machine tap (high speed) with spiral groove / in helix Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: no coating Standard: DIN 371, DIN 376 Form: C (lead length 2 to 3 threads) Helix: 40 ° Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine spiral tap (high speed), R45 SE 800 Fitting: ISO2 / 6H - ground thread profile Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 45 ° Usage: 7.1: Aluminum 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys

Machine spiral tap for NC / CNC machines (quick-cutting) in S-NC helix Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread start: C, 2 courses - see the attached photo Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Grounded thread profile Coating: TiCN - Titanium Carbon Nitride Helix angle: 45° Usage: 1.3 : Structural and carbon steel, low-alloy steel, cast steel up to 1100N/mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N/mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N/mm2 3.3 : Nodular and malleable cast iron up to 700N/mm2 3.4 : Nodular and malleable cast iron up to 1000N/mm2 1.1 : Magnetic and soft structural steel up to 400M/mm2 1.2 : Structural and automatic steel up to 500N/mm2 1.5 : Hardened and hardened steels up to 38 HRC up to 1200N/mm2 2.2 : Austenitic steel up to 850N/mm2 2.3 : Heat-resistant corrosion-resistant steel up to 1100N/mm2 4.4 : Copper and its alloys up to 400N/mm2 4.5 : Brass up to 600 N/mm2 4.7 : Aluminum and copper alloys with long chips up to 800N/mm2 4.8 : Aluminum and zinc alloys with long chips up to 800N/mm2 6.3 : Brass with a long chip up to 700N/mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N/mm2 7.3 : Aluminum alloys with silicon content from 5% to 10%, up to 400N/mm2 This tap is intended for NC machines - synchronized thread cutting

Three-edged conical countersink Max. diameter: according to the selected variant Number of edges: 3 Clamping shank: see product description for selected variant Blade angle: 90st. Material: HSSE-VA - cobalt high-speed steel with vanadium admixture Coating: oxidation Standard: DIN 335 C

Handle for precision drill chuck - marked 0.15mm Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. gear diameter: see description of selected variant Max. gear diameter: according to the selected variant Handles are suitable for chucks - see related products Before ordering the handle, compare the parameters with your used handle or chuck!

Metric hand tap M - set There are 3 taps in the set for the basic climb. There are 2 taps in a set for a gentle climb. Material: HSSE - high speed cobalt steel Povak: OX - oxidation Fitting: ISO2 / 6H Standard: DIN352 (replacement ČSN 22 3010 / CSN 223010) Usage: Structural, medium-alloy tool and heat-treated steels with strength up to 1100 MPa Stainless and heat-resistant steels up to 900 MPa Free-cutting, structural and heat-treated steels with a strength of up to 800 MPa Mild structural steels up to 500 MPa Gray, ductile and malleable cast iron Alloyed aluminum and copper alloys

Morse clamping cone with extended offset tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

Morse clamping cone with extended tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

Morse clamping cone with carbide tip Morse taper: according to the selected variant Other dimensions - see product description for individual variants Tip angle: 60 ° The tip is detachable - front and back

Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Catalog number: S30112

Precise quick-clamping drill head without handle, self-locking, quick-clamping, without handle, type SOLID Guaranteed accuracy (throwability) up to 0.06mm - checked in our workshop Ground jaws, professional quality. For clamping the drill: according to the selected variant Clamping cone: according to the selected variant Other dimensions of the chuck - see product description for individual variants The mandrel is not part of the package, we can deliver it in MK 1, MK2, MK3, MK4 versions Main use : For stand and column drills

Machine tap, straight groove, for BSCy cycle thread Thread type: BSC (British Standard Cycle thread) Top thread angle: 60 ° Form: C Tolerance: medium Standard: BS811, DIN374 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes