Metalworking tools

Turning insert, Turntable cutting insert - DGN2202J IC1028, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN TiN < IC1028 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. Usage: Steel: P20-P50 (Vc = 60-170 m / min; 200-560sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M20 -M40 (Vc = 60-150 m / min; 200-490 fm; Fn = 0.04-0.12 mm / rev.) Conditions of use - see enclosed photo Type J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. No .: 6003041

Turning insert, Turntable cutting insert DGN2202J IC908, Iscar Cutting width: 2,2mm Coating: PVD, TiAlN IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 (Vc = 70-180 m / min; 230-590sfm; Fn = 0,04-0,12 mm / rev.) Stainless steel: M05 -M20 (Vc = 50-180 m / min; 160-590 µm; Fn = 0.04-0.12 mm / rev.) Cast iron: K15-K30 (Vc = 110-175m / 570 sfm; Fn = 0,04-0,12 mm / rev.) Non-Ferrous Metals and Plastics: N05-N20 Superslitz: S05-S20 Hardened: H05-H15 Tough conditions - see enclosed photo Type J: For cutting and grooving pipes, smaller diameters and thin-walled materials Ref. No. 6002961

Grooving insert, replaceable insert for turning - grooving DGN1000P IC508, Iscar Grooving width: 1.0mm Coating: PVD, TiCN TiN >IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003280 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Grooving insert, replaceable insert for turning - grooving DGN2000P IC508 , Iscar Recess width: 2.0mm Coating: PVD , TiCN TiN IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003282 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Recessing insert, replaceable insert for turning - grooving DGN3000P IC508, Iscar Recess width: 3.0mm Coating: PVD, TiCN TiN IC508 series: Tough submicron substrate with TiCN TiN PVD coating. Designed for a wide range of materials at low to medium cutting speeds, intermittent cutting and unstable conditions. Highly resistant to notch wear and build-up. Usage: Steel: P20-P40 Stainless steel: M20-M30 Cast iron: K20-K30 Non-ferrous metals and plastics: N10-N30 Superalloys: S10- S40 Carbide: H10-H20 Cutting conditions - see attached photo Type P: Dividing and grooving of soft (sticky) materials, thin and small workpieces. Very sharp breaker geometry - similar to a polished blade. Order no. no.: 6003414 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Clamping collet for JAL collet clamping head / collet clamp - larger jaws (fits in clamping case with ČSN 221490 or 221491 or 221492) Inner diameter of the collet: according to the selected variant Outer diameter of collet: 28mm Standard: PN 241495 / 24 1495

Right holder for replaceable inserts for internal thread, type SIL, drilled - for internal cooling Knife for internal turning of threads, for threaded inserts, for special applications Tread knife holder, for threaded slices Clamping diameter x Diameter of the relieved part: according to the selected variant For plates marked: IL, size according to the selected variant Other dimensions - see the attached catalog sheet The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally. The holder fits Carmex plates and others - see related products. The construction of the holder is adapted for cutting trapezoidal threads - the holder does not have a support part for classic threaded slices with a "tip".

Left holder for Iscar interchangeable blades Clamping dimensions: according to the selected variant Interchangeable plates have markings: according to the selected variant Plates are produced DGN - neutral, DGR - right and DGL - left A key for changing the slice is supplied with the goods. The plate is not part of the package, it can be purchased separately - see related products.

Mug brush made of corrugated steel wire Diameter: according to the selected variant Other dimensions - see product description for individual variants Material: steel, TiN coating Thread: M14x2.0 (classic angle grinder thread)

Nut for collet clamp with hexagon Nut size: according to the selected variant Other dimensions: see product description for individual variants Standard: DIN6499 Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Grooving insert, replaceable insert for turning - grooving DGN2002C IC830, Iscar Grooving width: 2.0mm Coating: PVD, AlTiN TiN >Series IC830: Suitable for intermittent cutting and roughing of stainless steel, classic steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Cutting conditions - see attached photo Type C : For grooving and grooving bars, hard materials. Order no. No. 6011378 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe face slot holder for interchangeable inserts Korloy MGMN 300, type AAKT-K-R Knife for front piercing diameter Scope: according to the selected variant Marking of plates: according to the selected variant Recess width: according to the selected variant Recess depth: according to the selected variant / attached catalog sheet Other dimensions: see the attached catalog sheet Type VBD: Korloy MGMN - double-sided The product comes with a key for changing the blade.