Metalworking tools

DNMG 110404 VL IC908 IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Superslitz: S05-S20 Hardness: H05-H15 Typical conditions - see enclosed photo Typ VL: Special die-cutter for machining refractory alloys and stainless steel valves. Ref. No .: 5594572

VBD SNMG 120404 - TF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - Universal: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Superslitz: S05-S20 Hard Hoses: H05-H15 Tough conditions - see attached photo TF type: Universal use in normal cutting conditions. Ref. No .: 5596001

Turning insert VBD WNMG 060408 PP IC907 Radius 0.8mm Coating: PVD, TiAlN TiN Series IC907: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 Superalloys: S05-S20 Carbide: H05-H15 Cutting conditions - see attached photo Type PP: Ideal for machining very sticky materials under normal cutting conditions. Suitable for heat resistant steel, stainless steel, aluminum alloy and mild low carbon steel. Cat. no.: 5506167 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD WTMG 080408 TF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Superslitin: S05-S20 Hardened: H05-H15 TF: Universal use under normal cutting conditions . Kat. No .: 5596898

VBD TPUN 160308 IC3028 IC3028 Series: The toughest series for machining stainless steel, heat-resistant alloys at low and medium speeds, intermittent cut, roughing operations with larger chipping. Usage: Steel: P25-P45 Stainless Steel: M15-M35 Superslitz: S20-S30 Terms of use - see attached photo Cat. No. 5597228

VBD CNMG 120408 TF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Superslitin: S05-S20 Hardened: H05-H15 TF: Universal use under normal cutting conditions . Kat. No .: 5598518

Lathe insert VBD DCMT 11T302 - PF IC907 Radius 0.2mm Up. hole - diameter : 4.4mm Coating : PVD , TiAlN TiN Series IC907 : Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Usage - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 Superalloys: S05-S20 Carbide: H05-H15 Cutting conditions - see attached photo Type PF: Suitable for finishing operations of common steels and non-traditional alloys. Order no. no.: 5598832 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD CNMG 120408 VL IC806 Radius 0.8mm Coating: PVD - AlTiN "SUMO TEC" IC806 Series : Hard series with a special SUMO TEC post-coating surface treatment. Suitable for turning heat-resistant steels and titanium alloys and inconel at low to medium cutting speeds. High resistance to wear and plastic deformation. Usage - universal: Superalloys: S15-S25 General conditions - see the attached photo Type VL : Breaker for machining refractory alloys and stainless steel valves Cat. no.: 5599908 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD VNMG 12T308 - NF IC3028 IC3028 Series: < br> The toughest series for machining stainless steels, low-to medium-speed alloys for intermittent cutting, roughing operations with larger chipping. Usage: Steel: P25-P45 Stainless Steel: M15-M35 Superslitz: S20-S30 Terms of use - see attached photo Type NF: Suitable for common and finishing operations. Ref. No .: 5599936

VBD CCGT 060204 - AS IC20 Radius: 0,4mm Coating: uncoated, polished coating IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Ref. : 5599989

Right straight turning knife 60 ° made of high-speed steel Clamping square: according to the selected variant Other dimensions - see product description for each variant Material: HSS - high speed steel Standard: ČSN 223316 / CSN 22 3316

VBD APKT 1003 PDR - HM IC20 IC20 Series: Suitable for routine and finishing operations, roughing aluminum, cast iron and stainless steel. Plates are especially recommended for machining non-ferrous metals - aluminum, copper, brass, plastics, etc., or cutting / sharpening / casting to reduce the chip and the feed to a minimum. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Terms and conditions - see attached photo HM Type: General use Cat. : 5600047