Metalworking tools

Extra long machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Carbide machine tap (high speed) M straight slot VHM HRC60 Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: C, 2-3 strokes - see attached photo Material: VHM - (VollHartMetall) - carbide Ground thread profile Color marking: without marking Coating: TiCN - Titanium Carbon Nitride Usage: 6.1: Hardened steels up to 60 HRC (Weldox 1100) 6.2: Hardened steels up to 60 HRC (Hardox 500)

Carbide machine tap (high speed), straight slot VHM HRC60 Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: C, 2-3 strokes - see attached photo Material: solid carbide Version with internal cooling Ground thread profile Color marking: without marking Coating: TiCN - Titanium Carbon Nitride Usage: 6.1: Hardened steels up to 60 HRC (Weldox 1100) 6.2: Hardened steels up to 60 HRC (Hardox 500)

Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 3D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)

Left machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Set tap made of sintered steel HSSE-PM There are 3 taps in the set for the basic pitch. For fine pitch, there are 2 taps in the set. The pre-cutting tap has an insert with a drill diameter under the thread Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 352/3-P Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN - Titanium Carbon Nitride Ground thread profile Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics

Carbide drill TK / HA / PVD Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 8D d1 = d2 Helix angle: 30 - 35° Tip angle: 118° Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 / DIN1897 Usage : Steel, stainless steel, titanium, aluminum, nickel, non-ferrous metals, cast iron, plastics * up to 45 HRC It is a carbide drill that was manufactured based on the standard of classic HSS drills. I.e. these drills have the same length, helix angle and tip as classic HSS drills. We are able to supply these drill bits uncoated or with another coating (TiN)

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Machine spiral tap (high speed) R15 SE 800 Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiAlSiN Helix angle: 15 ° Usage: 4.2: Aluminum with silicon content: 1%

Machine spiral tap (high speed) R15 1400 PMS IK TiCN with cooling hole Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 C Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiCN (Titanium Carbon-Nitride) Ground thread profile + hole for cooling emulsion / liquid Helix angle: 15 ° Number of edges: 3 Usage: 1.5. : Hardened and hardened steels up to 38 HRC up to 1200N / mm2 1.6. : Hardened and hardened steels up to 44 HRC up to 1400N / mm2 2.3. : Heat-resistant stainless steel up to 1100N / mm2 3.4. : Ball and malleable cast iron up to 1000N / mm2 FANAR taps correspond in quality to Czech N@rex taps

Carbide drill TK / HA / PVD Average: according to the selected variant Length: 3D Helix angle: 30 - 35 ° Tip angle: 140 ° Four-area cut Coating: TiAlN (Titanium Aluminum Nitride) Carbide: fine grain K40UF Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC

Machine tap with straight groove and chip breaker Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Helix angle: 40 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content