Metalworking tools

VBD DCMT 11T308 F3P IC8150 Coating: CVD, TiCN Al2O3 TiCN TiN IC8150 Series: Hard substrate with enriched cobalt layer, MTCVD TiCN and alpha Al2O3 CVD coating. Excellent thermal stability and resistance to peeling and plastic deformation. It is recommended for high-speed machining of steels under stable conditions. Application: Steel: P01-P30 Cast iron: K05-K15 Standard conditions - see attached photo F3P type: for normal and finishing operations in the machining of steels. Low cutting forces thanks to a positive blade providing very reliable performance and tool life. Ref. : 5566870

Turning insert VBD TCMT 090204 F3P IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN < b> Series IC8250: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Usage: Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type F3P : for routine and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 5566881 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 060204 -14 IC830 Radio 0,4mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type 14: Suitable for common and finishing operations on mild steels, also ideal for machining non-traditional alloys Ord. Ä. : 5567367 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 09T308 -14 IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type 14: Suitable for common and finishing operations on mild steels, also ideal for machining non-traditional alloys Ord. Ä. : 5567368 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

DNMG 150608 - M3P IC8250 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No. 5567488

DNMG 150612 - M3P IC8250 IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No .: 5567489

TNMG 160412-M3P IC8250 Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No .: 5567504

Lathe insert VBD CNMG 120404 VL IC806 Radius 0.4mm Coating: PVD - AlTiN "SUMO TEC" IC806 Series : Hard series with a special SUMO TEC post-coating surface treatment. Suitable for turning heat-resistant steels and titanium alloys and inconel at low to medium cutting speeds. High resistance to wear and plastic deformation. Usage - universal: Superalloys: S15-S25 General conditions - see the attached photo Type VL : Breaker for machining refractory alloys and stainless steel valves Cat. no.: 5567594 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120404 TF IC830 Radius 0,4mm Coating: PVD, AlTiN TiN IC830 series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Type TF: Universal use in common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Cat. Ä. : 5567678 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408-F3M IC6025 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN Series IC6025: Hard substrate with cobalt enriched layer, MTCVD with SUMOTEC layer and alpha Al2O3 CVD coating. Suitable for finishing and general machining of stainless steels at medium to high cutting speeds. Long service life even during roughing operations, unstable cutting conditions and intermittent cutting. Usage: Stainless steel: M15-M35 Cutting conditions - see attached photo Type F3M: Sharp breaker for finishing operations when machining stainless steels. Low cutting forces thanks to the positive edge providing very reliable performance and tool life. The wavy chip former ensures good chip removal. Order no. no.: 5567824 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD DCMT 070204 IC830 IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type: Suitable for normal machining and finishing operations Cat. No. 5568583

VBD CCMT 060204 PF IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo PF Type: Suitable for conventional and finishing operations of conventional steels and non-traditional alloys Ref. No .: 5568585