Metalworking tools

Turning insert VBD DNMG 110408 PP IC9350 Radius 0,8mm Up. hole - diameter: 3,8mm Coating: CVD, TiCN alpha Al2O3 TiN IC9350 series: Very rigid substrate ts cobalt layer supplemented with MTCVD TiCN and Al2O3 coating. Excellent rigidity and resistance to wear when machining steel. Suitable for intermittent and unstable cutting conditions. / : Ideal for machining highly sticky materials under normal cutting conditions. Suitable for heat-resistant steel, stainless steel, aluminum alloys and mild carbon steel. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CCMT 09T304 SM IC9350 Radius 0,4mm Coating: CVD, TiCN alpha Al2O3 TiN < b> Series IC9350: Very solid substrates with cobalt layer supplemented by MTCVD TiCN and Al2O3 coating. Excellent rigidity and resistance to wear when machining steel. Suitable for intermittent and unstable cutting conditions. Usage: Steel: P20-P45 Stainless steel: M15-M30 Terms - see attached photo Type SM : Perfect for common and finishing operations, ideal for machining non-traditional alloys Ord. Ä. : 05507642 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TNMG 160408-GN IC5005, photo is illustrative Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN Series IC5005 : Hard substrate with multi-layer MTCVD TiCN coating and a thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast iron) at medium to high cutting speeds under stable or slightly unstable conditions. It is used when there is a higher requirement for wear resistance than IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Cutting conditions - see attached photo Type GN : General use. Cat. no.: 5507721 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD CNMG 120408 GN IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Application: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Special conditions - see appendix © photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5507730 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD WNMG 080408 GN IC5005 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5005 series: Hard substrate with multilayer MTCVD TiCN coating and thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast irons) at medium to high cutting speeds at stable or slightly unstable conditions. It is also used with a higher requirement for wear resistance compared to IC5010 carbide or other grades. Application: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Special conditions - see appendix © photo Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 05507731 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD WNMA 080408 IC5010 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiN IC5010 Series: < Plates have a very hard substrate (base), ideal for machining gray and ductile cast iron under stable or slightly unstable conditions - unbroken or slightly interrupted cut -> finishing operations. Application - Roughing: Cast iron: K10-K25 WNM A : The plate is free slats - ideal for roughing. Kat. No .: 5507737

VBD WNMG 080412 IC8300 Radim 1.2mm Coating: CVD, TiCN Al2O3 TiN IC8350 Series: Plates with very high stiffness, with high resistance to wear. Ideal for intermittent cut or unstable engagement conditions. Usage - Universal: Steel: P20-P45 Stainless Steel: M15-M30 General conditions - see enclosed photo GN: Universal use common cutting conditions. Kat. No .: 5507760

Turning insert VBD CNMG 120404-TF IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Application: Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type TF : Universal use under common cutting conditions. Suitable for carbon and alloy steels and heat-resistant alloys Ord. Ä. : 5507806 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD WNMG 080404 NF IC8250 Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 Types of NF: Suitable for common and finishing operation. Kat. No .: 5507829

VBD WNMG 080408 GN NC8350 IC8350 Series: Plates with very high stiffness, with high resistance to wear. Ideal for intermittent cut or unstable engagement conditions. Usage - Universal: Steel: P20-P45 Stainless Steel: M15-M30 General conditions - see enclosed photo GN: Universal use common cutting conditions. Kat. No. 5507851

Turning insert VBD WNMG 06T308 GN IC8350 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiN IC8350 series: Plates with very high rigidity, with high resistance to abrasion. Ideal for intermittent cuts or unstable engagement conditions. Application - universal: Steel: P20-P45 Stainless steel: M15-M30 Terms and conditions - see attached photo < br> Type GN: Universal use in common cutting conditions. Contact the Company: Kat. Ä. : 5507857 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD WNMG 080408 GN NC8350 IC8350 Series: Plates with very high stiffness, with high resistance to wear. Ideal for intermittent cut or unstable engagement conditions. Usage - Universal: Steel: P20-P45 Stainless Steel: M15-M30 General conditions - see enclosed photo GN: Universal use common cutting conditions. Kat. No. 5507851