Metalworking tools

Carbide (TK) milling cutter for universal milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo

Carbide (TK) milling cutter for universal long milling Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Universal milling (roughing and finishing operations), the cutter has 2 cutting edges through the center Suitable for machining nickel, cast iron, non-ferrous metals, plastics, aluminum alloys, stainless steels and austenitic steels Also suitable for thermal and hydro clamping, high reliability on CNC machines Cutting conditions - see attached photo

Short machine tap, straight slot, for conical tubular thread with chip breaker Thread type: NPT - American conical pipe thread Conicity: 1:16 Top angle: 60 ° Form: B Material: HSS - High speed steel Can also be used as a machine short tap Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For manual and machine use For through holes

Machine tap with straight groove and chip breaker Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content

Machine tap (high speed) with chip breaker, straight slot Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371, DIN 376 Thread lead: B, 4 courses - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: 7.1: Aluminum and aluminum alloys 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys

Machine tap (high speed) with chip breaker, straight slot Fitting: ISO2 / 6H - ground thread profile Thread lead: B, 4 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: 7.1: Aluminum 1.1: Mild, ductile and magnetic steels with strength up to 400N / mm2 6.1: Copper and copper alloys

Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics

Machine tap for NC / CNC machines (high speed) with chip breaker, straight slot S-NC Fitting: ISO2 / 6HX - ground thread profile Standard: DIN 371 Thread lead: B, 4 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Ground thread profile Coating: TiCN - Titanium Carbon Nitride Usage: 1.3 : Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4 : Alloy steels, cold drawn tool steel up to 1000N / mm2 2.1 : Ferritic and martensitic stainless steel up to 1000N / mm2 3.3 : Ball and malleable cast iron up to 700N / mm2 3.4 : Ball and malleable cast iron up to 1000N / mm2 1.1: Magnetic and mild structural steel up to 400M / mm2 1.2: Structural and free-cutting steel up to 500N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.2: Austenitic steel up to 850N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 4.4: Copper and its alloys up to 400N / mm2 4.5: Brass up to 600 N / mm2 4.7: Aluminum and copper alloys with long chips up to 800N / mm2 4.8: Aluminum and zinc alloys with long chips up to 800N / mm2 6.3: Brass with long chips up to 700N / mm2 7.2: Aluminum alloys with silicon content up to 5%, up to 700N / mm2 7.3: Aluminum alloys with silicon content from 5% to 10%, up to 400N / mm2 This tap is designed for NC machines - synchronized thread cutting

Machine tap (high speed) with chip breaker, straight slot Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371, DIN374, DIN376 Thread lead: B, 4 courses - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Coating: OX - Oxidation Usage: 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 800N / mm2

Machine tap with straight groove and chip breaker, made of sintered steel, type INOX Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2

Machine tap with straight groove and chip breaker, type INOX Fitting: ISO3 / 6G - ground thread profile - free thread - under zinc Material: HSSE (High speed steel + 5% Cobalt) Coating: HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2

Machine tap with straight groove and chip breaker, made of sintered steel, MasterTap type Fitting: ISO2 (6HX) Thread start: B, 4 courses - see attached photo Material: HSSE-PM (High-speed steel + 5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage : Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.