Metalworking tools

Grooving, raking, serrating wheel straight Pitch of grooves: according to the selected variant Diameter: 20mm Width: 10mm Hole diameter: 6mm Standard: ČSN 227150 Final sale - only a limited selection

Insert for glasses / glasses Outer diameter: according to the selected variant Inner diameter: according to the selected variant Material: see description of selected variant

Coarse-toothed socket cutter - ground Diameter: according to the selected variant Height: according to the selected variant Clamping diameter: according to the selected variant Helix angle: 40° Head angle: 22° Other dimensions - see the attached catalog sheet Material: HSSCo5 - ground cutter Standard: DIN 1880, ISO 2780/2586 Type W : For machining soft tools, e.g. aluminum and non-ferrous metals. Usage : Automatic and structural steels up to 600 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 Mpa Aluminium, Al-Si alloys up to 500 Mpa Order no. code - series: 610275V

Holder for threaded eyes - hand beam (glasses) for round threaded jaw (round threaded jaws) For jaws with a diameter: according to the selected variant For jaws: see description of selected variant Standard: ČSN 241520/24 1520

Right inner holder for TIPSR interchangeable wafers Knife for internal recesses - turning Knife diameter at the insert x Clamping diameter: according to the selected variant For plates: according to the selected variant Other dimensions: see product description for individual variants Type of VBD : MLG1012L , MLG1015L and MLG1020L The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. The holder is rigid, the inserted slice is secured with a screw.

Mandrel for boring head VBC / F1 Clamping cone: according to the selected variant Clamping thread for boring head: UNEF 1-1/2" - 18 threads per inch Standard: DIN69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Sanding sheet - paper B Dimensions: 230x280mm Grain: according to the selected variant Abrasive grain: silicon carbide, SiC abrasive grain Binder: resin Series 522 Colour: black-green Usage: for sanding under water, recommended use for sanding varnishes, paints, bodywork, steel, cast iron, wood and plastics

Set of 2 grooving, raking / serrating wheels oblique Pitch of grooves: according to the selected variant Tilt angle: 30 ° Diameter: 20mm Width: 10mm Hole diameter: 6mm The wheels from this set have oppositely oriented oblique grooves, therefore the combination of these two wheels creates a groove in the shape of a grid Standard: ČSN 227155 and ČSN 227156 Final sale - only a limited selection

Genuine mini reaming knife with internal cooling for fitting the end of the thread Clamping diameter of the knife (D): according to the selected variant Radius on the edge: according to the selected variant Length (L1): according to the selected variant Other dimensions - see the attached PDF catalog

Real mini boring knife with internal cooling for deburring, countersinking and setting the end of the thread Clamping diameter of the knife (D): according to the selected variant Radius on the edge: according to the selected variant Length (L1): according to the selected variant Other dimensions - see the attached PDF catalog

Extension for circular jaw For a jaw with a diameter: according to the selected variant Total length: 60mm Square / driver: 3/8" (9.5mm) On the sides there are locking screws for clamping the eyelet.

Left - plug-in coarse-tooth cutter for horizontal milling machine Diameter: according to the selected variant Height: according to the selected variant Clamping diameter: according to the selected variant Other dimensions and fastening style - see product description for individual variants Helix angle: 45° Material: HSS - cast ground cutter Standard: ČSN 222051 Usage : Structural and cast steels up to 800 MPa