Metalworking tools

Cobalt roughing cutter for T-slot milling Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo5 - 5% cobalt Standard: ČSN 22 2180, DIN 851, ISO 3337 Type NR-F : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it functions as a roughing and finishing tool. Cat. No. - series: 314215P

Cobalt roughing cutter for T-slot milling, with double weldon surface Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo5 - 5% cobalt Standard: ČSN 22 2180, DIN 851, ISO 3337 Type NR-F : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it functions as a roughing and finishing tool. Cat. No. - series: 314215PH (type PH has more blades than type P)

Coarse-toothed socket cutter - cast Diameter: according to the selected variant Height: according to the selected variant Clamping diameter: according to the selected variant Helix angle: 45° Head angle: 20° Other dimensions - see the attached catalog sheet Material : HSSE (i.e. HSS + Co5 ) - cast ground mill Standard: PN 222050 / ČSN 22 2050, DIN1880 W, ISO 2780/2586 Type W : For machining soft tools, e.g. aluminum and non-ferrous metals. Usage : Automatic and structural steels up to 600 MPa Cast iron up to 240 HB Cu-Zn, Cu-Sn alloys up to 800 Mpa Aluminium, Al-Si alloys up to 500 Mpa Order no. code - series: 610973

Right holder for replaceable inserts for internal thread, type SIR Knife for internal turning of threads, for threaded inserts type U IR/L Tread knife holder, for threaded slices Clamping diameter x Diameter of the relieved part: according to the selected variant For plates marked: U IR, size according to the selected variant Other dimensions - see the attached catalog sheet The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally. The holder fits Carmex plates and others - see related products.

Right grooving holder for ZQR interchangeable inserts Knife for external turning Clamping dimensions: according to the selected variant For plates: according to the selected variant Brush width: according to the selected variant Other dimensions: see product description for individual variants Type of VBD : 1) SP300 (Korloy, Tornado and others) 2) BALDONITE LFMX 3N The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. The holder is rigid, the inserted slice is secured with a screw.

Mandrel for boring head VBC / F1 Clamping cone: according to the selected variant Clamping thread for boring head: UNEF 1-1/2" - 18 threads per inch Standard: DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Hexagon thread die / thread die with hexagon jaws Thread type: R or also Rc or BSPT (British Standard Pipe Taper) - tubular inch thread with conical profile Conicity: 1:16 Pitch : in numbers of turns per inch Top angle: 55 ° Form: A Material: HSS - High speed steel Dimensions - see attached catalog sheet Standard: DIN 2999, DIN 382 Usage: Well machinable materials up to 800 N / mm2 Non-alloy and low-alloy steels

Left holder for replaceable inserts for internal thread, type SIL Knife for internal turning of threads, for threaded inserts type U Tread knife holder, for threaded slices Clamping diameter x Diameter of the relieved part: according to the selected variant For plates marked: U IR/L, size according to the selected variant Other dimensions - see the attached catalog sheet The product comes with a key for changing the blade The holder is without a threaded plate - must be purchased additionally. The holder fits Carmex plates and others - see related products.

Left parting holder for ZQR interchangeable inserts Knife for external turning Clamping dimensions: according to the selected variant For plates: according to the selected variant Brush width: according to the selected variant Other dimensions: see product description for individual variants Type of VBD : 1) SP300 (Korloy, Tornado and others) 2) BALDONITE LFMX 3N The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. The holder is rigid, the inserted slice is secured with a screw.

Quarter circular concave radius cutter with cylindrical shank Radius: according to the selected variant Other dimensions - see product description for individual variants Material: HSS Standard: DIN 6518 B

Quarter circular concave radius cutter with cylindrical shank Radius: according to the selected variant Coating: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 Standard: DIN 6518 B Cat. No. - series: 360018

Clamping reduction sleeve for shaping machine - for clamping holders type BT (see appendix) For shaping holders with up. shank: according to the selected variant Clamping dimension of the housing: according to the selected variant More information - see the enclosed catalog sheet With the help of this case, it is possible to clamp CNC shaping holders type BT in the shaping machine - see the enclosed catalog sheet