Metalworking tools

Wrench for collet chuck, for collet chuck with hex nut Size: according to the selected variant Usage: For loosening and tightening hexagonal ER nuts of collet clamps Using a classic open key will damage the nut! We recommend using this exact key.

Conical / arrow / pin / countersink end mill with spiral cutting edges Angle: according to the selected variant Blade diameter - Dmin: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Number of blades: 4 Other dimensions - see product description for individual variants Material: HSS Standard - replacement for: ČSN 222814 / 580718 / DIN 1835P

Abrasive disc for stand/machine sander, type 98A Diameter: according to the selected variant Disc height: according to the selected variant Opening: according to the selected variant Width of the disc wall (from the front side): according to the selected variant Width of the disc at the clamping point: according to the selected variant Diameter of the disc bottom: according to the selected variant Grain: according to the selected variant Abrasive type: 98A - light pink artificial corundum, ceramic binder Hardness: according to the selected variant Structure: according to the chosen variant Speed: 32 m/s * You can find the method of marking the discs in the attached table. Recommended use: steel up to 55HRC, stainless steel Possible use: steel class 11 and up to 67 HRC

Right machine tap with spiral groove, for metric thread - with hexagon for battery drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : C Helix angle: 15° Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For blind holes

Discharge wedge for tools with driver - Morse cone For punching tools with a morse taper: according to the selected variant Standard: ČSN 241279 / CSN 24 1279 or DIN317 / DIN 317 Other dimensions - see product description for individual variants Supplied black

Cobalt milling cutter for cutting pen grooves Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo5 - 5% cobalt Standard: ČSN 22 2185, DIN 850 Cat. No. - series: 320005 and 320015

Right internal MGIVR insert holder Knife for internal recesses - turning Knife diameter at the insert x Clamping diameter: according to the selected variant For plates: according to the selected variant Other dimensions: see product description for individual variants Type VBD: MGMN - double-sided The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. The holder is rigid, the inserted slice is secured with a screw.

Stainless steel brush suitable for surface cleaning, deburring Disc diameter: according to the selected variant Width: according to the selected variant Clamping diameter: according to the selected variant Strength of the wire: according to the selected variant Maximum revolutions: see product description for individual variants Material: stainless steel

Conical / arrow / pin / countersink end mill with straight edges Angle: according to the selected variant Blade diameter - Dmin: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see product description for individual variants Material: HSS Standard - replacement for: ČSN 222814 / 580718 / DIN 1835P

Abrasive disc for stand/machine sander, type 49C Diameter: according to the selected variant Disc height: according to the selected variant Opening: according to the selected variant Width of the disc wall (from the front side): according to the selected variant Width of the disc at the clamping point: according to the selected variant Diameter of the disc bottom: according to the selected variant Grain: according to the selected variant Abrasive type: 49C - green silicon carbide, ceramic binder Hardness: according to the selected variant Structure: according to the chosen variant Speed: 32 m/s * You can find the method of marking the discs in the attached table. Recommended use: carbide + SIC, cast iron, non-ferrous metals Possible use: steel up to 67HRC, stone, titanium alloys, stainless steel, plastic, fiberglass

Conical / arrow / pin / countersink end mill face four-edged, four-toothed with weldon surface Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 25° Head angle: 12° Material: HSSCo8 Standard: ČSN 222814, DIN 1835P Cat. number - series: 580718

Left internal MGIVR insert holder Knife for internal recesses - turning Knife diameter at the insert x Clamping diameter: according to the selected variant For plates: according to the selected variant Other dimensions: see product description for individual variants Type VBD: MGMN - double-sided The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products. The holder is rigid, the inserted slice is secured with a screw.