Metalworking tools

Abrasive disc for stand/machine sander, type 99BA Diameter: according to the selected variant Disc height: according to the selected variant Opening: according to the selected variant Width of the disc wall (from the front side): according to the selected variant Width of the disc at the clamping point: according to the selected variant Diameter of the disc bottom: according to the selected variant Grain: according to the selected variant Abrasive type: 98A - light pink artificial corundum, ceramic binder Hardness: according to the selected variant Structure: according to the chosen variant Speed: 32 m/s * You can find the method of marking the discs in the attached table. Recommended use: steel up to 55HRC, stainless steel Possible use: steel class 11 and up to 67 HRC

Slide table Model: according to the selected variant Dimensions and parameters - see attached catalog sheet or product description for individual variants Bronze nut, bronze nut feed. Prismatic guide with a demarcation bar and the possibility of arresting the movement. All surfaces sanded. Material: FC-30 Accuracy: 0.01 / 100mm The running surfaces are hardened and precisely ground Usage : - For multi-axis machining - can be used as a base for another axis. - Fixing, for example, to a rotary table, a tilting table, a divider or an angle plate.

Abrasive non-woven disc Diameter: according to the selected variant Abrasive height: according to the selected variant Grain: according to the selected variant Clamping shank: 6mm Type of grain: corundum Binder: synthetic resin The optimal peripheral speed for bodies with abrasive fleece is 32 m/sec. The open structure of the material gives the tools elasticity and ensures a cool cut. The great adaptability of the fleece ensures that there are no changes to the surface geometry. Usage for matting and satin-finishing of ferrous and non-ferrous metals, cleaning of oxidized non-ferrous metals, matting of stainless steels, roughening of plastics, as a preparation for gluing.

High quality tool saw blade for hand saw, Bihart Number of teeth per inch: according to the selected variant Length: 300mm Material : HSSCo (cobalt) Bi-METAL, for metal, for stainless steel

Quality tool saw blade for a hand saw Number of teeth per inch: according to the selected variant Length: 300mm Material: HSS Bi-METAL, for metal

Right machine tap, straight slot with chip breaker, for metric thread - with hexagon for cordless drill Size: according to the selected variant Other dimensions - see the attached catalog sheet Form : B Material: HSSE - High Speed Steel + 5% Cobalt Co5 Standard: DIN371 (M12 DIN376) Usage : Well machinable materials up to 900 N/mm2 Unalloyed and low-alloyed steels For through holes

Discharge wedge for tools with driver - Morse cone For punching tools with a morse taper: according to the selected variant Standard: ČSN 241279 / CSN 24 1279 or DIN317 / DIN 317 Material: tool steel M2 Heat treated / hardened Supplied with a bronze finish *M2 steel is a high-speed alloy steel with high hardenability and wear resistance. It has a very fine-grained structure and has a low resistance to chopping. Corrosion resistance is not high, but it is higher than most tool steels.

Miller for straight-edged cutting pen grooves Diameter: according to the selected variant Blade width: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS Standard: ČSN 22 2185 Cat. No. - series: 320100

Ľavý držiak na výmenné plátky na vnútorný závit, typ SIL, vŕtaný - pre vnútorné chladenie Nôž pre vnútorné sústruženie závitov, pre závitové doštičky Držiak závitového noža , pre závitové plátky Upínací priemer x Priemer odľahčenej časti : podľa zvolenej varianty Pre doštičky s označením : IL, veľkosť podľa zvolenej varianty Ďalšie rozmery - viď priložený katalógový list S tovarom je dodávaný kľúč na výmenu plátku Držiak je bez závitovej doštičky - nutné dokúpiť. Do držiaka pasujú doštičky Carmex, KVX KONAN a ďalšie - viď súvisiace produkty. Do držiakov na doštičky veľ. 11IL nie je možné upnúť doštičky zn. Pramet - doštičky Pramet majú malú upínaciu dieru.

Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping Morse cone: according to the selected variant Shaft diameter for cutter: according to the selected variant Other dimensions - see attached photo The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen Standard: DIN6358

Left parting lathe holder for MGEHR interchangeable inserts Knife for external turning Clamping dimensions: according to the selected variant For plates: according to the selected variant Brush width: according to the selected variant Other dimensions: see product description for individual variants Type VBD: MGMN - double-sided The product comes with a key for changing the blade. The plate is not part of the package, it can be purchased separately - see related products for individual variants The holder is rigid, the inserted slice is secured with a screw.

Mini socket wrench for collet clamp Wrench for clamping nuts: according to the selected variant Usage: For loosening and tightening ER nuts of collet clamps type M (Mini)